Devon · England
uPVC window & door repair in Ash Mill, Devon
Damaged window, door or sill in Ash Mill? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Holes from removed fittings and alarms
- Burns on sills
Ash Mill and the surrounding area
Ash Mill is about 12 miles north-west of Tiverton, in Devon. Jobs in Ash Mill are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover all 586 towns and villages across Devon.
We cover every part of the EX36 postcode area. If you are just outside Ash Mill, we cover Bishop's Nympton (2 miles north-west), Newtown (2 miles north-west), Meshaw (3 miles south-west), Knowstone (3 miles east) and Molland (4 miles north). Within a short drive, we also cover Barnstaple (15 miles north-west), Tiverton (12 miles south-east), Crediton (14 miles south), Newport (15 miles west), South Molton (5 miles west) and North Tawton (15 miles south-west).
Local landmarks in Ash Mill
In Ash Mill, that means homes near Church of St Peter and the streets around them. Well-known places in the area include South Molton Hospital (5.1 miles west). The countryside around Ash Mill includes Rackenford and Knowstone Moors.
About our uPVC repair in Ash Mill
We fill and refinish the damage so it blends into the frame, woodgrain finishes included. We also do snagging repairs for builders. Common call-outs are for damage during building work and holes from removed fittings and alarms, across doors & door panels, conservatory frames and white uPVC.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Location
- Ash Mill (EX36)
- Region
- Devon
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Other services in Ash Mill
Questions from Ash Mill
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before and we will plan for it.
What happens once I’ve sent pictures?
We come back with a fixed price. You are under no obligation.
Do you repair coloured uPVC?
Yes. Colour and grain are matched by hand.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Should you replace it?
A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. Repairing the damage keeps the original. Our uPVC repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- No extra charge for your area
Take a look at our pricing.
What uPVC repair costs
Repairs from £95. There’s no charge for travel to Ash Mill. The price comes down to:
- How easy the damage is to reach
- The colour and finish to match
- How much damage there is
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Quotes from your photos
Phone photos are fine, there’s no need for anything special. Make sure they show:
- Natural light rather than flash
- A picture taken from further back
- Whether it’s been repaired or coated before
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Ash Mill
- Window frames & sills
- White uPVC
- Doors & door panels
- Conservatory frames
- Coloured and woodgrain uPVC
Common problems we fix in Ash Mill
uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.
Send us a picture if you notice any of these:
- Burns on sills
- Damage during building work
- Scratches from ladders and furniture
- Holes from removed fittings and alarms
Comparing quotes
- How long it needs to cure
- Whether a trained technician does the job
- What happens if they find more damage
- If travel is included in the price
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Landlord and trade work in Ash Mill
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
The process
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a morning or an afternoon for most jobs. We leave the room clean and ready to use once it has cured.
- First the frame or panel is cleaned.
- We fill scratches, chips and holes.
- The repair is sanded smooth.
- We match the colour, including woodgrain finishes.
- We blend the repair into the surrounding surface.
Getting ready for the visit
- Clear the area around the damage
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
