Oxfordshire · England

uPVC window & door repair in Aston, Oxfordshire

uPVC repair for Aston, without a refit. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Aston homes

How we handle uPVC repair in Aston

We also do snagging repairs for builders. The damage is filled and refinished so it blends into the frame, including woodgrain finishes. We are often asked to fix burns on sills and scratches from ladders and furniture, in doors & door panels, coloured and woodgrain uPVC and window frames & sills.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Area
Aston (RG9)
County
Oxfordshire
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
White panel with a damaged edge, shown before and after repair

What a repair can’t fix

A repair is not right for every job, for example:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we’ll tell you honestly before you book.

Surfaces we repair

  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • White uPVC
  • Window frames & sills

Why repair rather than replace?

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage leaves the unit in place. Our uPVC repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.

Why choose Surface Doctor in Aston

  • One-year guarantee on every repair
  • Colour-matched on site
  • CHAS and Constructionline accredited
  • Repair technicians who travel to you, UK-wide

See our full price list.

About Aston

Aston is about 2 miles north-east of Henley-on-Thames, in Oxfordshire. Across the RG9 area, a technician comes to you. We work in 443 places across Oxfordshire. Our nearest city page is London, about 34 miles away.

Here we cover the RG9 postcode area. You’ll find streets such as Remenham Lane and Aston Ferry Lane, all of which we cover. We also cover the places around Aston: Mill End (1 mile north), Remenham Hill (1 mile south), Remenham (1 mile west), Medmenham (1 mile east) and Bockmer End (2 miles east). Within a short drive, we also cover Thame (14 miles north), Benson (11 miles north-west), Chinnor (10 miles north), Tilehurst (9 miles south-west), Wallingford (12 miles west) and Little Heath (10 miles south-west).

Local landmarks in Aston

Around Aston, we work in homes near Fawley Court and Temple Island, Church of St Nicholas and Flower Pot Hotel and the streets around them. For rail, the closest station is Henley-On-Thames station, about 1.7 miles south-west. Further afield, we also cover the area around Marlow Community Hospital (4.6 miles east) and Frazer Nash Archives (1.9 miles south-west). Open spaces near Aston include Weycock Hill and Hurley Chalk Pit.

Map of Aston © OpenStreetMap contributors

What affects the price in Aston

Prices start from £95. We charge the same across the UK, including Aston. What changes the price is:

  • The type of damage
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • What the surface is made of

Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what we need:

  • Something in shot to show the size
  • The postcode, so we can plan the visit
  • A wider photo showing the whole window, door or sill
  • Whether it’s been repaired or coated before

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.

Aston questions

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It clears as the materials cure.

What information do you need?

Send photos through the quote form or call 0345 017 0787.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Which areas do you work in?

Across the UK, so Aston is covered. Prices do not change with location.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Can you repair a burn on a uPVC sill?

Yes. We fill and refinish the burnt area to match.

Are there extra charges for Aston?

We do not add a call-out fee. Your fixed price includes everything.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Do you need uPVC repair in Aston?

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

If you can see any of these, send us a photo:

  • Burns on sills
  • Chips and dents
  • Holes from removed fittings and alarms
  • Damage during building work

What to look for in a quote

  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the photos show
  • How soon you can use it again
  • What the guarantee covers, and for how long

How to compare quotes

For landlords and businesses

We’re used to working with agents and managing companies. Send the address, pictures and access details.

We work for landlords, letting agents and housing providers in Aston as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What happens on the day

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.

  1. First the frame or panel is cleaned.
  2. Next we fill the damage.
  3. The repair is sanded smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.