Kirklees · England

uPVC window & door repair in Birkby, Kirklees

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Birkby. Send photos for a free, fixed quote.

  • Repairs from £95
  • Scratches from ladders and furniture
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

Trusted uPVC repair in Birkby

About our uPVC repair in Birkby

We fill and refinish the damage to match the frame, including woodgrain finishes. We also do snagging repairs for builders. Our technicians work on doors & door panels, conservatory frames and coloured and woodgrain uPVC, and the jobs we see most are scratches from ladders and furniture and chips and dents.

We stand behind the work with a one-year guarantee, so you are covered after the visit. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

White panel with a damaged edge, shown before and after repair
Location
Birkby (HD2, HD1, HD3)
Area hub
Kirklees
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Landlords, agents and businesses in Birkby

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we will tell you honestly before you book.

Materials we work on in Birkby

  • Coloured and woodgrain uPVC
  • Window frames & sills
  • Conservatory frames
  • White uPVC
  • Doors & door panels

Our work in Birkby

Birkby is about 1 mile north of Huddersfield, in Kirklees. Whether you are in the middle of Birkby or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 189 places in Kirklees. Our nearest city page is Leeds, about 14 miles away.

Jobs in HD2, HD1 and HD3 are booked in the same way as anywhere else. Local streets include Bryan Road, Kaffir Road and Binham Road, and we cover them all. Close by, we cover Edgerton (1 mile south), Fixby (1 mile north), Marsh (1 mile south), Lindley (1 mile west) and Birchencliffe (1 mile west). We also work in nearby towns such as Dewsbury (7 miles east), Batley (7 miles north-east), Mirfield (4 miles east), Liversedge (5 miles north-east), Cleckheaton (5 miles north-east) and Heckmondwike (6 miles north-east).

Around Birkby

In Birkby, that means homes near Spinks Nest pub, The Church of St Cuthbert and Greenhead College, among other places. Birkby’s nearest station is Huddersfield station, about 1.1 miles south-east. A little further out are Automobilia Transport Museum (1.2 miles south-east) and Kingsgate Shopping Centre (1.4 miles south-east). Open spaces near Birkby include Castle Hill.

Map of Birkby © OpenStreetMap contributors

What affects the price in Birkby

Repairs from £95. There are no hourly rates or hidden extras. The price depends on:

  • How hard the colour is to match
  • The type of damage
  • The size and number of damaged areas
  • The material

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • Where you are, by postcode
  • Natural light rather than flash
  • A photo taken from further back
  • A close-up of the damage, in focus

The quickest way to a price is to send a couple of photos through our quote form or call us. We will tell you honestly if a repair is the right fix.

What happens on the day

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and we start. Allow a morning or an afternoon, and we will tell you if anything changes.

  1. We clean the frame or panel.
  2. We fill scratches, chips and holes.
  3. We smooth the repair.
  4. We match the colour, including woodgrain finishes.
  5. We blend the repair into the surrounding surface.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Mention if the room is upstairs or in a flat
  • Have a window or extractor fan available

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a fixed quote

Read more

Should I try a DIY kit first?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Repair or replace in Birkby?

A new window, door or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage keeps the original. Our uPVC repair starts from £95. We charge the same wherever you are, so there’s no premium for Birkby. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Birkby customers choose us

  • A fixed quote before booking
  • Rooms protected and left tidy
  • Repair technicians who travel to you, UK-wide
  • Generally one visit, start to finish

Read our pricing.

Questions from Birkby

Do you work in Birkby?

Yes, we do. We send a technician to Birkby for every job, with no extra charge for travel.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Can you match woodgrain uPVC?

Yes. We recreate the colour and grain by hand.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can I get a quote without a visit?

In nearly every case. If photos don’t show enough, we will ask for another angle.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

What we are called out for in Birkby

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

Send us a picture if you notice any of these:

  • Burns on sills
  • Chips and dents
  • Holes from removed fittings and alarms
  • Damage during building work

What to look for in a quote

  • Whether the colour is mixed to match
  • What prep work is covered
  • A fixed price, and whether VAT is included
  • What happens if they find more damage

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.