Kent · England
uPVC window & door repair in Blean, Kent
uPVC repair in Blean without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Chips and dents
- Burns on sills
Covering Blean
Blean is about 3 miles north-west of Canterbury, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Blean is one of 922 towns and villages in Kent where we work. We work right across the region, from Blean to London (51 miles away).
Jobs in CT2 are booked in the same way as anywhere else. Jobs here include addresses on Westfield, School Lane and Vicarage Lane. With the A290 close by, Blean is easy for our technicians to reach. Other places close to Blean include Honey Hill (1 mile north-west), Tyler Hill (1 mile east), Denstroude (1 mile north-west), Hackington (1 mile east) and Yorkletts (2 miles north-west). Within a short drive, we also cover Ashford (14 miles south-west), Canterbury (3 miles south-east), Sittingbourne (14 miles west), Whitstable (3 miles north), Faversham (7 miles west) and Herne Bay (6 miles north-east).
Local landmarks in Blean
Around Blean, we work in homes near Blean Primary School, Church of St Cosmus and St Damian and Tyler Hill Meadow, among other places. Nearby too are The Archbishop's School (1.6 miles south-east) and St Edmund's School (1.3 miles south-east). The nearest railway station is Canterbury West station, roughly 2.1 miles south-east. Well-known places in the area include Sidney Cooper Museum (2.3 miles south-east) and Eastbridge Hospital of St Thomas the Martyr (2.4 miles south-east). For a walk, there’s Blean Woods RSPB Reserve.
How we handle uPVC repair in Blean
The damage is filled and refinished so it blends into the frame, woodgrain finishes included. We also do snagging repairs for builders. Our technicians work on coloured and woodgrain uPVC, window frames & sills and doors & door panels, and people most often call us about chips and dents and burns on sills.
Whatever the size of the job, you get the same one-year guarantee in Blean and across Kent. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.
- Area
- Blean (CT2)
- County
- Kent
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Blean
- Colour mixed on the day to match
- Work done at your home or business
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Questions from Blean
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you repair a burn on a uPVC sill?
Yes. We fill and refinish the burnt area to match.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- White uPVC
- Coloured and woodgrain uPVC
- Conservatory frames
- Window frames & sills
- Doors & door panels
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- We start by cleaning the frame.
- We fill scratches, chips and holes.
- We smooth the repair.
- We colour-match the finish, including woodgrain effects.
- We blend the repair into the surrounding surface.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Related advice
Do you need uPVC repair in Blean?
uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.
Send us a photo if you notice any of these:
- Holes from removed fittings and alarms
- Chips and dents
- Scratches from ladders and furniture
- Damage during building work
Questions to ask before booking
- How long it needs to cure
- The length of the guarantee and what it covers
- How the colour is matched
- A fixed price, and whether VAT is included
Landlord and trade work in Blean
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Blean. What changes the price is:
- Where the damage is and how we get to it
- The colour and finish to match
- How much damage there is
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
You can typically get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Natural light rather than flash
- The material, if you know it
Getting a quote takes a couple of minutes: photograph the damage, then the entire window, door or sill, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Places near Blean
What else we do in Blean
About our accreditations · Every repair comes with a one-year guarantee.
