Kent · England

uPVC Repair for Radfall homes

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Radfall. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Damage during building work
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Radfall

Prices and what affects them

Repairs from £95. Every quote is fixed and free. What we take into account:

  • Unusual colours or finishes
  • Access to the area
  • The type of damage
  • How many items we do on one visit

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • Where you are, by postcode
  • One sharp close-up of the damage

To get a price, send two or three pictures through our quote form or ring us. We will say immediately if a repair is the right fix.

uPVC repair at your home in Radfall

We fill and refinish the damage to match the frame, including woodgrain finishes. We also do snagging repairs for builders. Our repair technicians work on doors & door panels, conservatory frames and window frames & sills, and the jobs we see most are burns on sills and holes from removed fittings and alarms.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.

Before and after: a chipped white edge filled and refinished
Where
Radfall (CT5)
Region
Kent
Warranty
A year, on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

What we’re called out for in Radfall

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

The things clients generally mention when they call are:

  • Chips and dents
  • Burns on sills
  • Damage during building work
  • Holes from removed fittings and alarms

Before booking anyone

  • Whether the price is fixed and includes VAT
  • Whether a trained technician does the job
  • How long the guarantee is and what it covers
  • What protection goes down before work starts

10 questions to ask before booking

Radfall: your questions answered

Can you do more than one item on the same visit?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Is there a call-out fee?

There’s no separate call-out charge. Your fixed price includes everything.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What areas do you cover?

All of Kent, and the rest of the UK. Travel is included in the price.

Is the work guaranteed?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

What if the damage is worse than the photos show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Do you cover Radfall?

Yes, we do. Technicians travel to Radfall from across the region, and the price is the same as everywhere else.

How quickly can you book me in?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

What we can’t put right

We would rather lose a job than do one that won’t last, so these are the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we will tell you honestly before you book.

What we work on

  • Coloured and woodgrain uPVC
  • White uPVC
  • Conservatory frames
  • Window frames & sills
  • Doors & door panels

Should you replace it?

Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Prices start from £95. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • Honest advice, even when it means no job
  • No extra charge for your area
  • Fixed prices from your photos
  • Dust sheets down, tidy finish

Take a look at our prices page.

What happens on the day

Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a morning or an afternoon from start to finish. Before we go, we will explain when it can be used and how to care for it.

  1. We start by cleaning the frame.
  2. Next we fill the damage.
  3. We sand the repair smooth.
  4. The finish is colour matched, woodgrain included.
  5. The repair is blended into the surface around it.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available
  • Keep pets and children out of the room while we work

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire window, door or sill, we can price the job the same day in most cases.

Get a free quote

Related advice

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Our work in Radfall

Radfall is about 2 miles south-east of Whitstable, in Kent. Jobs in Radfall are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Radfall is one of 922 places in Kent where we work. You can also see our page for London, about 51 miles away.

Our technicians cover all of CT5 and the streets around it. From Radfall Road, Broomfield Gate and Dukeswood or a nearby road, a technician can come to you. Neighbouring places we cover include Chestfield (1 mile north), West End (1 mile north-east), Swalecliffe (2 miles north), Whitstable (2 miles north-west) and Tankerton (2 miles north-west). Larger places within reach include Canterbury (4 miles south), Margate (14 miles east), Sittingbourne (14 miles west), Ramsgate (15 miles east), Faversham (8 miles west) and Herne Bay (4 miles north-east).

Around Radfall

Around Radfall, we work in homes near The Whitstable School and the streets around them. Radfall’s nearest station is Chestfield & Swalecliffe station, about 1.5 miles north. A little further out are Tankerton Castle (2.3 miles north-west) and Sidney Cooper Museum (4 miles south). For a walk, there is West Blean and Thornden Woods.

Map of Radfall © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.