Gloucestershire · England

uPVC Repair in Cam

uPVC repair in Cam without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Burns on sills
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Cam homes

Common problems we fix in Cam

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and old fittings leave holes.

Most people get in touch after spotting something like this:

  • Scratches from ladders and furniture
  • Damage during building work
  • Burns on sills
  • Chips and dents

Comparing quotes

  • What happens if they find more damage
  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?
  • When it can be used again

How to compare quotes

uPVC repair in Cam, done in place

We also do snagging repairs for builders. The damage is filled and refinished to match the frame, woodgrain finishes included. If you’re dealing with chips and dents and damage during building work, we can help, on conservatory frames, coloured and woodgrain uPVC and white uPVC alike.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back. Clean with warm soapy water and a soft cloth. Do not use solvents or scourers.

Location
Cam (GL11)
County
Gloucestershire
Cover
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped white edge filled and refinished

Landlords, agents and businesses in Cam

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

For anyone letting property in or around Cam, we will quote for several properties at once. Just send photos for each address and we will price them together.

Prices and what affects them

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once
  • How much damage there is
  • What the surface is made of

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

Most quotes are done from pictures alone. To help us price it:

  • Natural light rather than flash
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • The material, if you know it

Most clients in Cam get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Common questions in Cam

Will there be a smell?

There may be a mild smell during the work.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Do you charge for travel?

There’s no separate call-out charge. Your fixed price includes everything.

Can you repair something that is been repaired before?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Can you quote from photos?

Nearly always. If pictures don’t show enough, we’ll ask for another angle.

Repairing versus replacing in Cam

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why book with us

  • Colours mixed by hand to suit your surface
  • Rooms protected and left tidy
  • No extra charge for your area
  • Most jobs done in one visit

Read our prices page.

When a repair isn’t the answer

We’ll always be straight with you, so here’s what a repair cannot fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we’ll tell you honestly.

What we work on

  • White uPVC
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Window frames & sills
  • Conservatory frames

Covering Cam

Cam is about 7 miles south-west of Stroud, in Gloucestershire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Cam is one of 470 towns and villages in Gloucestershire where we work. Our jobs stretch from Cam to Birmingham (57 miles away).

Here we cover the GL11 postcode area. We regularly work on streets such as Station Road, High Street and Church Road and the roads around them. Main roads around Cam include the B4066, which makes travel easy. Other places close to Cam include Farfield (1 mile south-east), Ashmead Green (1 mile east), Dursley (1 mile south-east), Woodmancote (2 miles south-east) and Rockstowes (2 miles south-east). Within a short drive, we also cover Gloucester (12 miles north-east), Stroud (7 miles north-east), Brockworth (13 miles north-east), Quedgeley (9 miles north-east), Lydney (7 miles west) and Innsworth (15 miles north-east).

Near you in Cam

Around Cam, we work in homes near Church of St Bartholomew, Cam Woodfield Junior School and Rednock School and the streets around them. For rail, the closest station is Cam & Dursley station, roughly 1.4 miles north. Well-known places in the area include Vale Community Hospital (0.8 miles south-east) and Drakestone Camp (1.4 miles south-west). For a walk, there’s Coaley Peak and WWT Slimbridge.

Map of Cam © OpenStreetMap contributors

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

How the visit works

You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.

  1. First the frame or panel is cleaned.
  2. Scratches, chips and holes are filled.
  3. The repair is sanded smooth.
  4. We colour-match the finish, including woodgrain effects.
  5. The repair is blended into the surface around it.

How to prepare

  • Let us know which floor the room is on
  • Make sure the room can be ventilated
  • Let the surface dry out before the visit

Get a quote

Email us a photo of the damage and a wider shot of the entire item, with your GL11 postcode, and we’ll come back with a fixed quote.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.