Redcar and Cleveland · England

uPVC Repair for Ellerby homes

Damaged window, door or sill in Ellerby? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Ellerby?

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We clean the frame or panel.
  2. Next we fill the damage.
  3. We smooth the repair.
  4. The finish is colour matched, woodgrain included.
  5. We blend the repair into the surrounding surface.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Have somewhere for us to park nearby if possible
  • Move bottles, mats and clutter away from the area

How to get a price

If you’re in Ellerby and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

About our uPVC repair in Ellerby

We also do snagging repairs for builders. The damage is filled and refinished to match the frame, including woodgrain finishes. Typical jobs include chips and dents and damage during building work, in coloured and woodgrain uPVC, white uPVC and doors & door panels.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Before and after: a chipped white edge filled and refinished
Location
Ellerby (TS13)
Region
Redcar and Cleveland
Cover
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

What a repair cannot fix

A few problems are outside what a surface repair can do:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Coloured and woodgrain uPVC
  • White uPVC
  • Window frames & sills
  • Conservatory frames
  • Doors & door panels

When to call us in Ellerby

uPVC is tough but not indestructible: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and removed fittings leave holes.

Look out for these signs:

  • Chips and dents
  • Scratches from ladders and furniture
  • Damage during building work
  • Holes from removed fittings and alarms

What to look for in a quote

  • Whether a trained technician does the job
  • How to look after the finish
  • Whether the price is fixed and includes VAT
  • How changes to the job are handled

Choosing a repair company

Your questions about uPVC repair in Ellerby

Which areas do you work in?

We cover the whole UK, including Ellerby and the rest of Redcar and Cleveland. Send your postcode with your pictures and we will offer you dates.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Ellerby.

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Do you cover Ellerby?

Yes. We work across the UK and travel to Ellerby and the rest of Redcar and Cleveland. Send us pictures for a fixed quote, or call 0345 017 0787.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your photos and you will get one combined price.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children.

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Repairing versus replacing in Ellerby

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. A repair keeps the original. Our uPVC repair starts from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • Most jobs done in one visit
  • Honest advice, even when it means no job

Take a look at our pricing.

About Ellerby

Ellerby is about 6 miles north-west of Whitby, in Redcar and Cleveland. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Ellerby is one of 48 towns and villages in Redcar and Cleveland where we work. You can also see our page for Newcastle upon Tyne, about 47 miles away.

Our visits in TS13 work the same way as everywhere else we cover. We also cover the places around Ellerby: Newton Mulgrave (1 mile north-west), Runswick Bay (1 mile north-east), Mickleby (1 mile south), Hinderwell (1 mile north) and West Barnby (2 miles south-east). Larger places within reach include Redcar (13 miles north-west), Guisborough (12 miles west), Marske-by-the-Sea (11 miles north-west), Skelton-in-Cleveland (9 miles west), Skelton (9 miles west) and Brotton (8 miles north-west).

Local landmarks in Ellerby

Typical jobs here are in homes near Oakridge Community Primary School, among other places. The nearest railway station is Lealholm station, about 4.8 miles south-west. A little further out are Mulgrave Castle (3.1 miles south-east) and Staithes Museum (2.8 miles north).

Map of Ellerby © OpenStreetMap contributors

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

What affects the price in Ellerby

Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:

  • How hard the colour is to match
  • What the surface is made of
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Getting a price from photos

Before you send pictures, these tips help us give you a firm price:

  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus

Send us pictures of the damage and one of the entire item, and tell us you are in Ellerby, and we will come back with a fixed quote.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.