Redcar and Cleveland · England
Bath & shower resealing (mastic) in Ellerby, Redcar and Cleveland
Bath, shower and sink resealing with new mould-resistant silicone at your home in Ellerby, with a one-year guarantee on every repair.
- Leaks at the edges
- Gaps in the seal
- Unsealed corners
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes about two hours for a bath. If anything looks different from your photos, we will talk to you before going ahead.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
How to prepare
- Tell us if there are stairs or a lift
- Open a window if you can
- Let the surface dry out before the visit
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our bath resealing in Ellerby
Resealing is quick, but it transforms the look. Fresh joints make the entire room look cleaner, and they keep water out. Common call-outs are for damp near the bath and a messy previous reseal, in shower trays & enclosures, basins & vanity units and kitchen worktops & sinks.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Ellerby (TS13)
- Region
- Redcar and Cleveland
- Cover
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Very wide gaps that need a trim
- Loose tiles, which need refixing first
- Rotten walls or floors behind the bath
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Basins & vanity units
- Wet rooms
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Why reseal now?
A reseal is one of the cheapest bathroom jobs there is. Failed sealant can lead to water damage that is much more expensive. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- One-year guarantee on every repair
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- Work done at your home or business
Take a look at our pricing.
Nearby places to Ellerby
What else we do in Ellerby
What bath resealing costs
Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How much damage there is
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Any details about the material
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Details of any past repairs
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Let steam out after showers
- Reseal when black spots won’t clean off
- Wipe the joints dry after use
- Use the extractor fan
Don’t scrape the sealant with anything sharp, and do not stand bottles on the seal.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Common problems we fix in Ellerby
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
People usually call us when they notice something like this:
- Silicone coming away from the tiles
- A messy previous reseal
- Water getting behind the bath or tray
- Old sealant that looks dirty
What to look for in a quote
- Aftercare advice
- Whether the colour is mixed to match
- What protection goes down before work starts
- Who will actually do the work
Landlord and trade work in Ellerby
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Ellerby questions
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens once I’ve sent photos?
We come back with a fixed quote. There is no obligation to book.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Ellerby and nearby
Ellerby is about 6 miles north-west of Whitby, in Redcar and Cleveland. We visit clients in Ellerby, so there’s no workshop to go to. Our technicians cover all 48 towns and villages across Redcar and Cleveland. Our nearest city page is Newcastle upon Tyne, about 47 miles away.
Here we cover the TS13 postcode area. Nearby, we also work in Newton Mulgrave (1 mile north-west), Runswick Bay (1 mile north-east), Mickleby (1 mile south), Hinderwell (1 mile north) and West Barnby (2 miles south-east). Within a short drive, we also cover Redcar (13 miles north-west), Guisborough (12 miles west), Marske-by-the-Sea (11 miles north-west), Skelton-in-Cleveland (9 miles west), Skelton (9 miles west) and Brotton (8 miles north-west).
Around Ellerby
Locally, our jobs take us to homes close to Oakridge Community Primary School. Ellerby’s nearest station is Lealholm station, about 4.8 miles south-west of the centre. Further afield, we also cover the area around Mulgrave Castle (3.1 miles south-east) and Staithes Museum (2.8 miles north).
About our accreditations · Every repair comes with a one-year guarantee.
