Moray · Scotland
uPVC Repair for Fogwatt homes
uPVC repair in and around Fogwatt: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Scratches from ladders and furniture
- Burns on sills
Do you need uPVC repair in Fogwatt?
uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and removed fittings leave holes.
Get in touch if you’ve noticed:
- Burns on sills
- Chips and dents
- Scratches from ladders and furniture
- Damage during building work
Comparing quotes
- What the guarantee covers, and for how long
- How changes to the job are handled
- Who will actually do the work
- Aftercare advice
uPVC repair in Fogwatt without replacing anything
The damage is filled and refinished to match the frame, woodgrain finishes included. We also do snagging repairs for builders. Whether it’s chips and dents and burns on sills, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.
- Location
- Fogwatt (IV30)
- Area hub
- Moray
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Fogwatt
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Fogwatt use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Honest limits
Before you book, it’s worth knowing the limits:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Conservatory frames
- Doors & door panels
- Coloured and woodgrain uPVC
- White uPVC
- Window frames & sills
Other services in Fogwatt
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- We start by cleaning the frame.
- Scratches, chips and holes are filled.
- We smooth the repair.
- We match the colour, including woodgrain finishes.
- The repair is blended into the surface around it.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
- Open a window if you can
Getting a price
For a price in Fogwatt, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
About Fogwatt
Fogwatt is about 4 miles south of Elgin, in Moray. Whether you are in the middle of Fogwatt or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 58 towns and villages in Moray, from the larger towns to small villages.
Postcode districts we cover here: IV30. From Bracany Gardens and Bracany Park or anywhere nearby, we can come to you. Nearby, we also work in Longmorn (1 mile north), Thomshill (1 mile west), Hallowood (2 miles north), Ashgrove (3 miles north) and Blackhills (3 miles north-east). We also work in nearby towns such as Buckie (13 miles north-east), Forres (13 miles west), Lossiemouth (8 miles north), Keith (13 miles east), Burghead (10 miles north-west) and Fochabers (7 miles east). If you are somewhere remote, call first so we can plan the visit.
What’s near Fogwatt
Fogwatt’s nearest station is Elgin station, about 3.4 miles north. A little further out are St Giles Centre (3.8 miles north) and Elgin Museum (3.7 miles north). Not far away are Findlay's Seat.
Should you replace it?
Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. A repair keeps the original. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- One price list for the entire UK
See our full price list.
What uPVC repair costs
Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- What the surface is made of
- How much damage there is
- What kind of damage it is
- How many items we do on one visit
Our prices are the same across the UK, so there’s no premium for Fogwatt. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- A picture taken from further back
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Upload photos of the damage and one of the whole item, with your IV30 postcode, and we will come back with a fixed quote.
Fogwatt: your questions answered
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Do you cover Fogwatt?
Yes. We work across the UK and come to Fogwatt and the rest of Moray. Send us pictures for a fixed quote, or call 0345 017 0787.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you match woodgrain uPVC?
Yes. Colour and grain are matched by hand.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
