Herefordshire · England

uPVC Repair for Holmer homes

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Holmer. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Chips and dents
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Need uPVC repair in Holmer?

How we handle uPVC repair in Holmer

The damage is filled and refinished so it blends into the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. We work on coloured and woodgrain uPVC, window frames & sills and white uPVC, and people most frequently call us about chips and dents and burns on sills.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Before and after: a chipped white edge filled and refinished
Location
Holmer (HR4, HR1)
Region
Herefordshire
Cover
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

Your questions about uPVC repair in Holmer

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

How much does uPVC repair cost in Holmer?

Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Can I get a quote without a visit?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

What happens next?

You’ll get a fixed quote back, normally with dates to choose from. You are under no obligation.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Do you cover Holmer?

Yes, we do. Technicians travel to Holmer from across the region, with no extra charge for travel.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Repair or replace in Holmer?

Replacing the frame or sill is a much bigger job, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Our uPVC repair starts from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Why choose Surface Doctor in Holmer

  • We come to you, anywhere in the UK
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your photos

Read our full price list.

Signs you need uPVC repair in Holmer

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes mark sills, and removed fittings leave holes.

Get in touch if you’ve noticed any of these:

  • Holes from removed fittings and alarms
  • Damage during building work
  • Scratches from ladders and furniture
  • Burns on sills

Questions to ask before you book

  • When it can be used again
  • Aftercare advice
  • How long the guarantee is and what it covers
  • Who will actually do the work

Choosing a repair company

How we price uPVC repair

Prices start from £95. You will know the full cost before you book. We take into account:

  • Access to the area
  • How hard the colour is to match
  • How much damage there is
  • Doing more than one item at once

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what we find most useful:

  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • Where you are, by postcode

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

When we’d advise against a repair

It helps to know what we cannot do too:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Coloured and woodgrain uPVC
  • Conservatory frames
  • Window frames & sills
  • Doors & door panels
  • White uPVC

What happens on the day

There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. We smooth the repair.
  4. We match the colour, including woodgrain finishes.
  5. The repair is blended into the surface around it.

Before we arrive

  • Tell us about parking, stairs or access
  • Let the surface dry out before the visit
  • Make sure the room can be ventilated

How to get a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Advice

About Holmer

Holmer is about 1 mile north of Hereford, in Herefordshire. Jobs in Holmer are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Holmer is one of 255 places in Herefordshire where we work. Our jobs stretch from Holmer to Birmingham (44 miles away).

Here we cover the HR4 and HR1 postcode area. We regularly work on streets such as Roman Road, Attwood Lane and Monarch Road. Being close to the A4103, Holmer is simple for us to get to. Other places close to Holmer include Widemarsh (1 mile south), Bobblestock (1 mile west), Huntington (1 mile west), Pipe and Lyde (1 mile north) and Whitecross (1 mile south-west). Larger places within reach include Ross-on-Wye (13 miles south-east), Ledbury (13 miles east), Leominster (10 miles north), Newton Farm (3 miles south), Merrivale (13 miles south-east) and Bromyard (12 miles north-east).

What’s near Holmer

We visit homes around Holmer CofE Academy, Church of St Bartholomew and Golden Lion pub, among other places. Also close by are Whitecross Hereford (1.2 miles south-west) and Robert Owen Academy (1.2 miles south). Holmer’s nearest station is Hereford station, roughly 1.2 miles south-east of the centre. Further afield, we also cover the area around Hereford Castle (1.7 miles south) and Victoria Eye Hospital (1.4 miles south). For a walk, there’s Dinedor Hill and Lugg Meadow.

Map of Holmer © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.