Herefordshire · England
Non-Slip Bath Coating for Holmer homes
Non-slip bath coating in and around Holmer: photo quotes, tidy work and a year’s guarantee.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
How we handle non-slip bath coating in Holmer
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We work on resurfaced baths, wet room floors (ask us) and enamelled baths, and common reasons people get in touch are a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Holmer (HR4, HR1)
- County
- Herefordshire
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Places near Holmer
Also in Holmer
Common problems we fix in Holmer
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- Whether they match the colour on site
- How soon you can use it again
- What aftercare is recommended
- What preparation is included
About Holmer
Holmer is about 1 mile north of Hereford, in Herefordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 255 towns and villages across Herefordshire. You can also see our page for Birmingham, about 44 miles away.
We cover every part of HR4 and HR1 and the streets around it. From Roman Road, Attwood Lane and Monarch Road or a nearby road, we can come to you. You will find Holmer on the A4103, which makes it straightforward to reach. Close by, we cover Widemarsh (1 mile south), Bobblestock (1 mile west), Huntington (1 mile west), Pipe and Lyde (1 mile north) and Whitecross (1 mile south-west). Within a short drive, we also cover Ross-on-Wye (13 miles south-east), Ledbury (13 miles east), Leominster (10 miles north), Newton Farm (3 miles south), Merrivale (13 miles south-east) and Bromyard (12 miles north-east).
Around Holmer
In Holmer, that means homes near Holmer CofE Academy, Church of St Bartholomew and Golden Lion pub and the streets around them. You will also find Whitecross Hereford (1.2 miles south-west) and Robert Owen Academy (1.2 miles south). The nearest railway station is Hereford station, about 1.2 miles south-east of the centre. Well-known places in the area include Hereford Castle (1.7 miles south) and Victoria Eye Hospital (1.4 miles south). Not far away are Dinedor Hill and Lugg Meadow.
What non-slip bath coating costs
You will know the full cost before booking. We take into account:
- How easy the damage is to reach
- How many items we do on one visit
- The type of damage
- The material
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
You can take the photos on your phone. Ensure they show:
- A close-up of the damage, in focus
- A wider photo showing the entire bath or shower tray
- Good light, ideally daylight, without flash glare
- Any details about the material
To get a price, send two or three pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- Normally one visit, start to finish
See our full price list.
Questions from Holmer
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Do you come to Holmer?
Yes. We work across the UK and travel to Holmer and the rest of Herefordshire. Send pictures and we’ll quote, or call 0345 017 0787.
How do I get a price for non-slip bath coating in Holmer?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
The process
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Open a window if you can
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
When we would advise against a repair
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Holmer
- Shower trays
- Wet room floors (ask us)
- Enamelled baths
- Acrylic baths
- Resurfaced baths
About our accreditations · Every repair comes with a one-year guarantee.
