Devon · England

uPVC Repair in Lamerton

Our repair technicians come to Lamerton for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Burns on sills
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Lamerton

Repairing versus replacing in Lamerton

A new window, door or sill costs far more, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Our uPVC repair starts from £95. Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Lamerton

  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit
  • Everything repaired in place
  • Honest advice, even when it means no job

Take a look at our prices page.

uPVC repair in Lamerton, done in place

We fill and refinish the damage to match the frame, woodgrain finishes included. We also do snagging repairs for builders. If you’re dealing with scratches from ladders and furniture and burns on sills, we can help, on window frames & sills, doors & door panels and coloured and woodgrain uPVC alike.

Every job is backed for twelve months. If something goes wrong with the work, we come back. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Location
Lamerton (PL19)
County
Devon
Cover
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
White panel with a damaged edge, shown before and after repair

Landlords, agents and businesses in Lamerton

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

For anyone letting property in or around Lamerton, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Our work in Lamerton

Lamerton is about 3 miles north-west of Tavistock, in Devon. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Lamerton is one of 586 towns and villages in Devon where we work.

Postcode districts we cover here: PL19. From Partwayes, Green Hill and Chestnut Close or a nearby road, we can come to you. We also cover the places around Lamerton: Rushford (1 mile south), Tavistock (3 miles south-east), Wilminstone (3 miles east), Tiddy Brook Meadows (4 miles south-east) and Mary Tavy (4 miles north-east). Within a short drive, we also cover Okehampton (15 miles north-east), Bere Alston (6 miles south), Horrabridge (6 miles south-east), Yelverton (7 miles south-east), Tamerton Foliot (10 miles south) and Lifton (6 miles north-west).

Around Lamerton

Typical jobs here are in homes near Blacksmiths Arms and Church of St Peter. The closest station to Lamerton is Gunnislake station, roughly 4 miles south of the centre. Well-known places in the area include Tavistock Hospital (2.3 miles south-east) and Tavistock Museum (2.6 miles south-east). Green spaces nearby include Hingston Down.

Map of Lamerton © OpenStreetMap contributors

Signs you need uPVC repair in Lamerton

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

Contact us if you’ve noticed:

  • Chips and dents
  • Burns on sills
  • Damage during building work
  • Scratches from ladders and furniture

Questions to ask before you book

  • A fixed price, and whether VAT is included
  • Whether the price covers travel
  • The length of the guarantee and what it covers
  • Whether the colour is mixed to match

Our hiring checklist

What uPVC repair costs

Prices start from £95. There is no charge for travel to Lamerton. The price depends on:

  • Where the damage is and how we get to it
  • How much damage there is
  • Whether old repairs or coatings need taking off
  • The colour and finish to match

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your photos

You can take the photos on your phone. Just ensure we can see:

  • The material, if you know it
  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Honest limits

We’d rather lose a job than do one that will not last, so these are the limits:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Conservatory frames
  • Window frames & sills
  • Doors & door panels
  • Coloured and woodgrain uPVC
  • White uPVC

Questions from Lamerton

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Is there a call-out fee?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

How do I get a price for uPVC repair in Lamerton?

Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Can you quote from pictures?

Typically, yes. Clear photos let us give you a fixed price without visiting.

What do you need from me?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before and we’ll plan for it.

The process

We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours.

  1. First the frame or panel is cleaned.
  2. Scratches, chips and holes are filled.
  3. We sand the repair smooth.
  4. The finish is colour matched, woodgrain included.
  5. Finally we blend it into the rest of the frame.

Getting ready for the visit

  • Let us know about parking or access
  • Tell us if there are stairs or a lift
  • Let the surface dry out before the visit

Get a quote

Upload photos of the damage and a wider shot of the entire item, with your PL19 postcode, and we will reply with a fixed quote.

Get a fixed price

Read more

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.