Hampshire · England

uPVC Repair for Oakridge homes

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for homes and businesses in Oakridge and across Hampshire. Send photos for a free, fixed quote.

  • Repairs from £95
  • Burns on sills
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Oakridge homes

Repair or replace in Oakridge?

A new window, door or sill costs far more, and it may not match the rest after years of weathering. A repair leaves the unit in place. Our uPVC repair starts from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why Oakridge clients choose us

  • Dust sheets down, tidy finish
  • Everything repaired in place
  • Fixed prices from your photos
  • Colours mixed by hand to suit your surface

Read our full price list.

uPVC repair at your home in Oakridge

We also do snagging repairs for builders. We fill and refinish the damage to match the frame, woodgrain finishes included. Typical jobs include scratches from ladders and furniture and chips and dents, across white uPVC, window frames & sills and coloured and woodgrain uPVC.

Every job is backed for twelve months in Oakridge and everywhere else. We return to put right any problem with the work. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Where
Oakridge (RG21, RG24)
County
Hampshire
Guarantee
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Damaged white panel edge repaired, before and after

What uPVC repair costs

Repairs from £95. We charge the same across the UK, including Oakridge. What changes the price is:

  • The material and finish
  • Any earlier repairs that need removing first
  • Access to the area
  • Whether it’s a chip, crack, burn or wear

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed price

Good photos mean an accurate price. Here’s what we find most useful:

  • Something in shot to show the size
  • One sharp close-up of the damage
  • What it’s made of, if you know
  • One picture of the whole window, door or sill

Getting a quote takes a couple of minutes: photograph the damage, then the whole window, door or sill, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Oakridge: your questions answered

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What happens if you find more damage?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Can a burnt window sill be fixed?

Yes. We fill and refinish the burnt area to match.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

When a repair isn’t the answer

A repair isn’t always the answer, and we would rather say so up front. We cannot fix:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us pictures and we will tell you honestly.

Materials we work on in Oakridge

  • Conservatory frames
  • Coloured and woodgrain uPVC
  • Doors & door panels
  • Window frames & sills
  • White uPVC

Oakridge and the surrounding area

Oakridge is about 1 mile north-east of Basingstoke, in Hampshire. Clients in Oakridge get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Oakridge is one of 683 places in Hampshire we cover. You can also see our page for London, about 46 miles away.

All of RG21 and RG24 is covered, from the main roads to the quietest streets. That includes homes on New Road, Vyne Road and Goat Lane and the roads around them. Oakridge is on the A3010, which makes it straightforward to reach. We also travel to Eastrop (1 mile south-east), Popley (1 mile north), Viables (1 mile south), Lychpit (2 miles east) and Old Basing (2 miles east). Larger places within reach include Farnborough (14 miles east), Fleet (11 miles east), Aldershot (14 miles east), Alton (10 miles south-east), Yateley (12 miles north-east) and Tadley (6 miles north).

Near you in Oakridge

Locally, our jobs take us to homes close to The Costello School, Oakridge Junior School and Eastrop Park, among other places. Other local landmarks include The Vyne Community School (within half a mile north), The Rising Sun pub (within half a mile south-west) and Ruins Of Chapel Of The Holy Trinity (within half a mile south). Oakridge has its own railway station: Basingstoke station. Other landmarks nearby include Basing House (1.6 miles east) and Basingstoke and North Hampshire Hospital (1.1 miles north-west). Not far away are Farleigh Hill and Daneshill Park Woods.

Map of Oakridge © OpenStreetMap contributors

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Signs you need uPVC repair in Oakridge

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

Most people get in touch after spotting one of these:

  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
  • Chips and dents
  • Damage during building work

Questions to ask before booking

  • How your room will be protected
  • Who will actually do the work
  • Whether the colour is mixed to match
  • How changes to the job are handled

Our hiring checklist

Landlord and trade work in Oakridge

We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

How it works

We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.

  1. First the frame or panel is cleaned.
  2. We fill scratches, chips and holes.
  3. We sand the repair smooth.
  4. We match the colour, including woodgrain finishes.
  5. The repair is blended into the surface around it.

Preparing for the visit

  • Ensure the room can be ventilated
  • Mention any parking restrictions or tricky access
  • Tell us about any previous repairs or coatings

Ask for a price

To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Send pictures for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.