North Somerset · England

uPVC Repair for Port Marine homes

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills in Port Marine, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Burns on sills
  • Holes from removed fittings and alarms
Surface Doctor technician repairing a wooden kitchen worktop

Book uPVC repair in Port Marine

Where we work around Port Marine

Port Marine is about 1 mile north-east of Portishead, in North Somerset. Jobs in Port Marine are booked in like any other job: a fixed price from your photos, then a visit to do the work. Port Marine is one of 86 places in North Somerset where we work. Our nearest city page is Birmingham, about 77 miles away.

Postcode districts we cover here: BS20. Streets in the area include Tansy Lane, Keel Avenue and Station Road, all of which we cover. If you are just outside Port Marine, we cover Portishead (1 mile south-west), Sheepway (1 mile south-east), North Weston (1 mile south-west), Clapton in Gordano (2 miles south) and Portbury (2 miles south-east). Within a short drive, we also cover Weston-super-Mare (12 miles south-west), Clevedon (6 miles south-west), Nailsea (4 miles south), Milton (12 miles south-west), Yatton (7 miles south-west) and Worle (12 miles south-west). As one of the bigger places in North Somerset, Port Marine sees plenty of our work.

Local landmarks in Port Marine

Locally, our jobs take us to homes close to Church of St Peter, Portishead Primary School and Gordano School and the streets around them. The closest station to Port Marine is Avonmouth station, roughly 2.6 miles east of the centre. Nearby you will also find North Somerset Community Hospital (5.2 miles south-west) and Oakham Treasures (2.3 miles south-east). For a walk, there’s Backwell Lake and Tickenham Hill.

Map of Port Marine © OpenStreetMap contributors

uPVC repair in Port Marine, done in place

Builders and developers use us for snagging repairs too. The damage is filled and refinished to match the frame, including woodgrain finishes. We regularly repair doors & door panels, window frames & sills and white uPVC, and people most often call us about chips and dents and holes from removed fittings and alarms.

All our work comes with our one-year guarantee. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Where
Port Marine (BS20)
County
North Somerset
Cover
One year on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
White panel with a damaged edge, shown before and after repair

Signs you need uPVC repair in Port Marine

uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

People usually call us when they notice something like this:

  • Chips and dents
  • Burns on sills
  • Holes from removed fittings and alarms
  • Damage during building work

What your quote should include

  • Whether the colour is mixed to match
  • How your room will be protected
  • Whether a trained technician does the job
  • How long it needs to cure

Our hiring checklist

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Conservatory frames
  • Doors & door panels
  • White uPVC
  • Window frames & sills
  • Coloured and woodgrain uPVC

What happens on the day

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We start by cleaning the frame.
  2. We fill scratches, chips and holes.
  3. We sand the repair smooth.
  4. We match the colour, including woodgrain finishes.
  5. Finally we blend it into the rest of the frame.

Before we arrive

  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children
  • Avoid using the area for a few hours before we arrive

How to get a price

The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say immediately whether it can be repaired.

Get a fixed quote

Advice

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

For anyone letting property in or around Port Marine, we will quote for several properties at once. Send photos for each one and we’ll price them together.

Repair or replace in Port Marine?

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. A repair leaves the unit in place. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Honest advice, even when it means no job
  • Normally one visit, start to finish
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor

Read our pricing.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

What affects the price in Port Marine

Prices start from £95. We charge the same across the UK, including Port Marine. What changes the price is:

  • Doing more than one item at once
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match
  • What kind of damage it is

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Getting a price from photos

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • A photo taken from further back
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Any details about the material

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Port Marine questions

Do you repair coloured uPVC?

Yes. We recreate the colour and grain by hand.

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. If there is more, we will tell you before starting.

How much does uPVC repair cost in Port Marine?

Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.

What do you need from me?

Photos of the damage, a photo of the entire window, door or sill and your postcode. After that, we just agree a date.

Which areas do you work in?

Everywhere in the UK, Port Marine included. Travel is included in the price.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

What happens next?

We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.