Kent · England
Bath Repair for Radfall homes
Bath repair for Radfall, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- Damage beneath the taps
Bath repair in Radfall, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Common call-outs are for chips under the taps and a hole punched through by something heavy, across acrylic, whirlpool & spa baths and pressed steel enamel.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Radfall (CT5)
- Region
- Kent
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Repairs from £95. We give every job a fixed quote from pictures. This is what makes a difference:
- How much damage there is
- The material
- The colour and finish to match
- How easy the damage is to reach
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When a repair isn’t the answer
A repair is not right for every job, including:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Repairing versus replacing in Radfall
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Work done at your home or business
- Most jobs done in one visit
- A fixed quote before you book
- We leave the room as we found it
Take a look at our prices page or resurfacing vs replacement cost guide.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Store metal items away from the bath
- Put a towel in the bath if you are working above it
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Questions from Radfall
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Are there extra charges for Radfall?
We don’t add a call-out fee. Your fixed price includes everything.
When can I have a bath again?
Normally within a day, depending on the repair.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Can you repair something that’s been repaired before?
Most of the time. Tell us what was done before and we’ll plan for it.
Nearby places to Radfall
More services for Radfall
When to call us in Radfall
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
If you can see any of these, send us a photo:
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
- A chip where the taps sit
- Rusty patches near the plughole
What to look for in a quote
- How to look after the finish
- Whether the price is fixed and includes VAT
- Who will actually do the work
- How the colour is matched
Radfall and the surrounding area
Radfall is about 2 miles south-east of Whitstable, in Kent. Customers in Radfall get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is London, about 51 miles away.
Our visits in CT5 are booked in the same way as anywhere else. We regularly work on streets such as Radfall Road, Broomfield Gate and Dukeswood. Nearby, we also work in Chestfield (1 mile north), West End (1 mile north-east), Swalecliffe (2 miles north), Whitstable (2 miles north-west) and Tankerton (2 miles north-west). We also work in nearby towns such as Canterbury (4 miles south), Margate (14 miles east), Sittingbourne (14 miles west), Ramsgate (15 miles east), Faversham (8 miles west) and Herne Bay (4 miles north-east).
Local landmarks in Radfall
Around Radfall, we work in homes near The Whitstable School. Radfall’s nearest station is Chestfield & Swalecliffe station, about 1.5 miles north. A little further out are Tankerton Castle (2.3 miles north-west) and Sidney Cooper Museum (4 miles south). Open spaces near Radfall include West Blean and Thornden Woods.
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
