Perth and Kinross · Scotland

uPVC Repair in Tarsappie

Our technicians come to Tarsappie for scratch, chip, burn and hole repairs to uPVC windows, doors and sills. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Chips and dents
  • Burns on sills
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Tarsappie homes

uPVC repair in Tarsappie, done in place

Builders and developers use us for snagging repairs too. The damage is filled and refinished to match the frame, woodgrain finishes included. Common call-outs are for burns on sills and chips and dents, in white uPVC, window frames & sills and conservatory frames.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back. Clean with warm soapy water and a soft cloth. Avoid solvents and abrasive cleaners.

Before and after: a chipped white edge filled and refinished
Area
Tarsappie (PH2)
County
Perth and Kinross
Cover
One year on every repair
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we look at:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • Unusual colours or finishes
  • How much damage there is

A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

How to get a fixed price

Two or three clear pictures are typically enough. It helps if you send:

  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage

Most customers in Tarsappie get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

When we would advise against a repair

Before booking, it’s worth knowing the limits too:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Tarsappie

  • Doors & door panels
  • White uPVC
  • Coloured and woodgrain uPVC
  • Window frames & sills
  • Conservatory frames

Covering Tarsappie

Tarsappie is about 2 miles south-east of Perth, in Perth and Kinross. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 107 places across Perth and Kinross. Our jobs stretch from Tarsappie to Edinburgh (about 31 miles away).

We work across the PH2 postcode area. Close by, we cover Scoonieburn (1 mile west), Bridge of Earn (2 miles south), Oakbank (2 miles north-west), Perth (2 miles north-west) and Forgandenny (3 miles south-west). Further out, we also cover Blairgowrie and Rattray (15 miles north), Auchterarder (12 miles south-west), Kinross (11 miles south), Letham (3 miles north-west), Scone (3 miles north) and Tulloch (4 miles north-west).

What’s near Tarsappie

For rail, the closest station is Perth station, roughly 1.7 miles north-west. Further afield, we also cover the area around St John's Shopping Centre (1.8 miles north-west) and Perth Museum (1.8 miles north-west). The countryside around Tarsappie includes Moncreiffe Hill.

Map of Tarsappie © OpenStreetMap contributors

Repair or replace in Tarsappie?

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. Repairing the damage keeps the original. Prices start from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Tarsappie

  • Everything repaired in place
  • Free fixed quotes from pictures
  • One-year guarantee on every repair
  • One visit for most repairs

Take a look at our pricing.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

Tarsappie questions

Do you repair coloured uPVC?

Yes. Colour and grain are matched by hand.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

How do I book?

Some photos, your postcode and how to reach you. On the day, access to the room.

Do you work in Tarsappie?

We do. We send a technician to Tarsappie for every job, and the price is the same as everywhere else.

What does uPVC repair cost?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the entire item with your PH2 postcode.

Is there any odour?

Expect a mild smell while we’re working, which fades afterwards.

The process

We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. It normally takes a few hours, and we will keep you posted as we go.

  1. We start by cleaning the frame.
  2. Scratches, chips and holes are filled.
  3. The repair is sanded smooth.
  4. The finish is colour matched, woodgrain included.
  5. The repair is blended into the surface around it.

Preparing for the visit

  • Make sure the area is dry
  • Let us know if it has been repaired before
  • Let us know about parking or access

Ask for a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

Signs you need uPVC repair in Tarsappie

uPVC is hard-wearing, but it does get damaged: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.

Get in touch if you’ve noticed any of these:

  • Damage during building work
  • Holes from removed fittings and alarms
  • Burns on sills
  • Chips and dents

Before you book anyone

  • What happens if they find more damage
  • Whether cleaning and preparation are in the price
  • Aftercare advice
  • Whether there are any call-out or travel charges

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.