Perth and Kinross · Scotland
Bath Re-enamelling in Tarsappie
Problem with your bath in Tarsappie? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A coating lifting around the plughole
How we handle bath re-enamelling in Tarsappie
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include a period or roll-top bath worth keeping and brown or grey marks that don’t clean off, across cast iron baths, pressed steel baths and acrylic baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Tarsappie (PH2)
- Region
- Perth and Kinross
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Signs you need bath re-enamelling in Tarsappie
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed any of these:
- An outdated colour you’d like to change
- Wear marks under the taps
- Several chips and rust patches
- A dull, rough surface that will not come clean
Before you book anyone
- What aftercare is recommended
- How soon you can use it again
- How the room is protected while they work
- What happens if they find more damage
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- What the surface is made of
- Unusual colours or finishes
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Our prices are the same across the UK, with no extra for Tarsappie. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed price
You can take the photos on your phone. Make sure they show:
- Natural light rather than flash
- Any details about the material
- One picture of the whole bath
- A close-up of the damage, in focus
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- We come to you, anywhere in the UK
- Most jobs done in one visit
- A fixed quote before booking
- Nothing taken out or refitted
Read our full price list and bath cost comparison.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
FAQs for Tarsappie
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Tarsappie and nearby
Tarsappie is about 2 miles south-east of Perth, in Perth and Kinross. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 107 places in Perth and Kinross, from the larger towns to small villages. We work right across the region, from Tarsappie to Edinburgh (about 31 miles away).
Every address in PH2 is within our area, from the main roads to the quietest streets. Nearby, we also work in Scoonieburn (1 mile west), Bridge of Earn (2 miles south), Oakbank (2 miles north-west), Perth (2 miles north-west) and Forgandenny (3 miles south-west). We also work in nearby towns such as Blairgowrie and Rattray (15 miles north), Auchterarder (12 miles south-west), Kinross (11 miles south), Letham (3 miles north-west), Scone (3 miles north) and Tulloch (4 miles north-west).
What’s near Tarsappie
The nearest railway station is Perth station, roughly 1.7 miles north-west. Well-known places in the area include St John's Shopping Centre (1.8 miles north-west) and Perth Museum (1.8 miles north-west). The countryside around Tarsappie includes Moncreiffe Hill.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Landlords, letting agents and housing providers in Tarsappie use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
How to prepare
- Clear the area around the damage
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Get a quote
For a price in Tarsappie, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Towns and villages near Tarsappie
Also in Tarsappie
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
