Orkney Islands · Scotland

Worktop Repair in Burray Village

Chip, burn and scratch repairs to kitchen and bathroom worktops in Burray Village, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Damage to a stone worktop
  • A damaged sink edge
Surface Doctor technician repairing a wooden kitchen worktop

Need worktop repair in Burray Village?

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

Worktop repair in Burray Village without replacing anything

We repair worktops in place. Most jobs take a few hours, and you can use the worktop again shortly afterwards. We’re often asked to fix damage to a stone worktop and burns from hot pans, on granite & marble, quartz and solid wood.

A one-year guarantee comes as standard, so you are covered after the visit.

Location
Burray Village (KW17)
Area hub
Orkney Islands
Cover
A year, on every repair
Price
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Close-up of a technician filling damage on a solid wood worktop

FAQs for Burray Village

Do I need to empty the worktop?

Only around the repair. The rest of the kitchen stays usable.

Can you do more than one item on the same visit?

Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.

Can a scorch mark be fixed?

Typically, yes. We remove the damaged surface, fill it and recreate the pattern.

Can you quote from photos?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

How do I get a price for worktop repair in Burray Village?

Repairs from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you match granite flecks?

Yes. We recreate the pattern by hand.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Should you replace it?

Even if you could get the same laminate, it may not match after years of light and use. A repair is matched to what you have now. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • Dust sheets down, tidy finish
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • One visit for most repairs

Take a look at our prices page.

Different materials, different repairs

Solid surface

Solid surface tops are the same material all the way through, so scratches and burns can frequently be sanded out and refinished.

Wood

Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.

Common problems we fix in Burray Village

Edges and corners chip most frequently, frequently when something heavy catches the edge.

Keep an eye out for any of the following:

  • Damage to a stone worktop
  • Knife marks
  • A heat mark or burn
  • A chipped edge

Questions to ask before you book

  • Is the price fixed, and does it include VAT?
  • When it can be used again
  • What preparation is included
  • The length of the guarantee and what it covers

Choosing a repair company

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Use a chopping board
  • Keep joints and edges dry
  • Clean spills straight away
  • Don’t knock pans against the edge

Wipe water away from joints and around the sink, especially on laminate and wood.

Edge chips can get bigger, and on laminate, water can get into the core. Repairing it early stops that.

What we do, step by step

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a morning or an afternoon, including clearing up.

  1. We assess the damage and the worktop material.
  2. The area is cleaned and the edges of the damage prepared.
  3. A filler that suits the material goes in, and missing edges are rebuilt.
  4. The colour and pattern are matched by hand.
  5. Finally we seal or finish the area to match.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

Get a quote

Upload a picture of the damage and one of the entire item, and tell us you’re in Burray Village, and we will reply with a fixed price.

Get a free quote

Related advice

Burray Village and the surrounding area

Burray Village is about 9 miles south of Kirkwall, in the Orkney Islands. Whether you are in the middle of Burray Village or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Burray Village is one of 51 places in the Orkney Islands where we work.

Here we cover the KW17 postcode area. Local streets include Lairds Road, Upper Waston Road and Sunfield. Close by, we cover Grimness (1 mile south), St Margaret's Hope (2 miles south-west), St Mary's (4 miles north), Widewall (4 miles south-west) and Upper Sanday (6 miles north-east). Burray Village is one of the larger places we cover in the Orkney Islands. For island and remote addresses, call first so we can plan the visit.

Around Burray Village

Further afield, we also cover the area around W Hourston Blacksmiths Museum (2.1 miles south-west). The countryside around Burray Village includes Echna Loch and Ward Hill.

Map of Burray Village © OpenStreetMap contributors

Prices and what affects them

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • How many items we do on one visit
  • Access to the area
  • How much damage there is
  • Whether it’s a chip, crack, burn or wear

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • The material, if you know it
  • Good light, ideally daylight, without flash glare

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

What we can’t put right

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Deep heat discolouration in quartz, which may not fully disappear
  • Through cracks in stone that is moving
  • Laminate that has blown or swollen

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Solid surface (such as Corian)
  • Laminate
  • Quartz
  • Solid wood
  • Granite & marble
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.