Powys · Wales

Worktop Repair for Ceri homes

Chip, burn and scratch repairs to kitchen and bathroom worktops at your home in Ceri, with a one-year guarantee on every repair.

  • Repairs from £95
  • Gouges in the surface
  • A damaged sink edge
Surface Doctor technician repairing a wooden kitchen worktop

Need worktop repair in Ceri?

Ceri questions

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

What does worktop repair cost?

Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Can you repair something that is been repaired before?

Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Do you come to Ceri?

Yes, we do. Repair technicians travel to Ceri from across the region, with no extra charge for travel.

Do I need to empty the worktop?

Just near the damage. The rest of the kitchen stays usable.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Worktop repair in Ceri without replacing anything

Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, with colour and pattern matched by hand. The worktop stays in place. Whether it’s scorch marks from pans and damage from fitting or building work, we can help, on granite & marble, laminate and solid surface (such as Corian) alike.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Speckled stone tiles with chips repaired to match the pattern
Area
Ceri (SY16)
Region
Powys
Cover
A year, on every repair
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

Replacing even one length of worktop means templating, cutting, fitting and often a new sink and hob connection. A repair is a few hours with everything left in place. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • Colour-matched on site
  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • One visit for most repairs

Read our prices page.

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Do not leave spills to soak in
  • Steer clear of strong cleaners
  • Keep a trivet by the hob
  • Do not let water sit on joints

Never put hot pans straight onto the worktop. Even stone and quartz can be marked by heat.

A chip on an edge can grow, and water can reach the core of laminate. An early repair prevents it.

Landlord and trade work in Ceri

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Covering Ceri

Ceri (Welsh: Kerry) is about 3 miles east of Y Drenewydd, in Powys. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. We work in all 234 towns and villages across Powys. You can also see our page for Birmingham, about 58 miles away.

Our visits in SY16 work the same way as everywhere else we cover. That includes homes on Garden Close, Dolforgan View and Fairfield and the roads around them. Neighbouring places we cover include Penygelli (2 miles north-west), Llanllwchaiarn (2 miles north-west), Gwestydd (3 miles north-west), Cefn Mawr (3 miles north-west) and Aber-miwl (3 miles north). Larger places within reach include Y Drenewydd (3 miles west), Y Trallwng (12 miles north-east), Llanidloes (12 miles west), Penygloddfa (3 miles north-west), Knighton (14 miles south-east) and Pen-y-Glodfa (3 miles north-west).

What’s near Ceri

Locally, our jobs take us to homes close to The Herbert Arms, St. Michael's C.I.W. School and Church Of St Michael And All Angels, among other places. Ceri’s nearest station is Newtown (Powys) station, roughly 2.4 miles west. Well-known places in the area include Robert Owen Museum (2.6 miles north-west) and Ceri Castle (less than half a mile south). Not far away are Weston.

Map of Ceri © OpenStreetMap contributors

What we are called out for in Ceri

Edges and corners chip most frequently, frequently when something heavy catches the edge.

Send us a picture if you notice any of these:

  • A damaged sink edge
  • Scratches and knife marks
  • Burns from hot pans
  • Chips caused during installation

Comparing quotes

  • How your room will be protected
  • Whether there are any call-out or travel charges
  • Aftercare advice
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

Materials and what they mean for the repair

Wood

Timber tops can be sanded and refinished, and burns and dents repaired.

Solid surface

Solid surface materials are uniform throughout, so scratches and burns can frequently be sanded out and refinished.

What we do, step by step

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.

  1. We assess the damage and the worktop material.
  2. The area is cleaned and the edges of the damage prepared.
  3. A filler that suits the material goes in, and missing edges are rebuilt.
  4. We recreate the colour and pattern by hand.
  5. Finally we seal or finish the area to match.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Open a window if you can
  • Let us know which floor the room is on

Ask for a price

To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a free quote

Related advice

What we cannot put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • A top that moves on its units
  • Discolouration deep in quartz
  • Water-swollen laminate

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Quartz
  • Solid surface (such as Corian)
  • Granite & marble
  • Laminate
  • Solid wood

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.