Telford and Wrekin · England
Worktop Repair for Cold Hatton homes
Fixed-price worktop repair in Cold Hatton and the surrounding area, typically in one visit.
- Repairs from £95
- Scratches and knife marks
- A chipped edge
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Worktop repair at your home in Cold Hatton
Burns from hot pans, chips on edges and scratches from knives make up most of our worktop work. We repair them all in your kitchen. Our repair technicians work on quartz, solid wood and granite & marble, and common reasons people get in touch are cuts and scratches in the surface and damage from fitting or building work.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Cold Hatton (TF6)
- Region
- Telford and Wrekin
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Covering Cold Hatton
Cold Hatton is about 8 miles west of Newport, in Telford and Wrekin. From the centre of Cold Hatton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 79 places in Telford and Wrekin. Our nearest city page is Birmingham, about 35 miles away.
We work across the TF6 postcode area. We also cover the places around Cold Hatton: Heath Lanes (1 mile west), Cold Hatton Heath (1 mile east), Ellerdine Heath (1 mile north-west), Waters Upton (1 mile south-east) and Crudgington (2 miles south). We also work in nearby towns such as Telford (8 miles south-east), Wellington (6 miles south), Dawley (9 miles south-east), Oakengates (8 miles south-east), Newport (8 miles east) and The Rock (8 miles south-east).
What’s near Cold Hatton
Around Cold Hatton, we work in homes near The Seven Stars Inn and All Hallows. Other landmarks nearby include Princess Royal Hospital (5.5 miles south) and Moreton Corbet Castle (4.1 miles west).
Questions from Cold Hatton
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can a quartz edge be fixed?
Yes. We repair quartz chips regularly, filled and polished to match.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Cold Hatton.
When we’d advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Severe heat marks in quartz
- Cracks right through stone that has moved
- A worktop that has moved because its support has failed
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Cold Hatton
- Solid wood
- Solid surface (such as Corian)
- Laminate
- Quartz
- Granite & marble
Nearby places to Cold Hatton
Also in Cold Hatton
Keeping it looking good
Simple care helps the repair last. We recommend:
- Re-oil timber worktops
- Wipe up spills quickly
- Keep joints and edges dry
- Use a chopping board
Leave the repaired area free of hot or heavy items until it has cured. After that, trivets and chopping boards protect it best.
Damage near the sink is worth repairing quickly, because water gets in and swells the board.
How we price worktop repair
Repairs from £95. We charge the same across the UK, including Cold Hatton. What changes the price is:
- How hard the colour is to match
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How many areas need work
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Something in shot to show the size
- Details of any past repairs
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
If you’re in Cold Hatton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Repairing versus replacing in Cold Hatton
Replacing even one length of worktop means templating, cutting, fitting and often a new sink and hob connection. A repair takes a few hours and leaves everything in place. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Cold Hatton
- One price list for the whole UK
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
Take a look at our full price list.
Different materials, different repairs
Granite and stone
Granite and stone chip at edges and cut-outs. The repair is filled and polished to the stone’s finish.
Solid surface
Solid surface tops are the same material all the way through, so scratches and burns can often be sanded out and refinished.
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- First we look at the damage and what the worktop is made of.
- Next we clean up and prepare the damaged area.
- We fill with a filler suited to the material and rebuild any missing edge.
- We recreate the colour and pattern by hand.
- We seal or finish the surface to suit the worktop.
How to prepare
- Clear the area around the damage
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
