Somerset · England

Worktop Repair in Corfe

We travel to Corfe for chip, burn and scratch repairs to kitchen and bathroom worktops. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Damage to a stone worktop
  • Damage around the sink cut-out
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Corfe

When we would advise against a repair

A repair is not right for every job, including:

  • Cracks right through stone that has moved
  • Discolouration deep in quartz
  • Laminate swollen by water from underneath

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Solid wood
  • Laminate
  • Granite & marble
  • Solid surface (such as Corian)
  • Quartz

How we handle worktop repair in Corfe

Matching a pattern is the skilled part of a worktop repair. We build up the colour and flecks by hand so the repair blends in. If you are dealing with a damaged sink edge and damage to a stone worktop, we can usually put it right.

Whatever the size of the job, it’s backed by a one-year guarantee.

Location
Corfe (TA3)
Region
Somerset
Warranty
12 months on all our work
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: damaged granite tiles repaired in place

What we do, step by step

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by checking the damage and the worktop material.
  2. The area is cleaned and the edges of the damage prepared.
  3. We fill the damage with a suitable filler and build up any lost edge.
  4. The colour and pattern are matched by hand.
  5. Finally we seal or finish the area to match.

Before we arrive

  • Make sure the room can be ventilated
  • Keep pets and children out of the room while we work
  • Ensure the area is dry

Getting a price

To get a price, send a couple of photos using our quote form or call us. We’ll say immediately whether it can be repaired.

Send photos for a quote

Read more

Repair or replace: which is better?

An identical replacement may look different next to aged worktops. A repair is matched to what you have now. Our worktop repair starts from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Why book with us

  • One price list for the whole UK
  • We leave the room as we found it
  • Colour-matched on site
  • We will tell you if it’s not worth repairing

Read our prices page.

Different materials, different repairs

Granite and stone

Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.

Quartz

Quartz is tough, though edges can chip. We fill chips with a tinted resin and polish them to the worktop’s finish.

What worktop repair costs

Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • What the surface is made of
  • How many items we do on one visit

We charge the same wherever you are, so there’s no premium for Corfe. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • What it’s made of, if you know
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • A wider photo showing the whole worktop

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Where we work around Corfe

Corfe is about 3 miles south of Taunton, in Somerset. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Corfe is one of 640 towns and villages in Somerset we cover.

Our technicians cover all of TA3. You’ll find streets such as Newton Court and Mill Lane, and we cover them all. If you’re just outside Corfe, we cover Netherclay (1 mile east), Staple Fitzpaine (2 miles south-east), Stoke St Mary (2 miles north-east), Bickenhall (3 miles east) and West Hatch (3 miles east). Further out, we also cover Taunton (3 miles north), Bridgwater (11 miles north), Chard (9 miles south-east), Wellington (6 miles west), Crewkerne (15 miles south-east) and Sydenham (12 miles north-east).

Near you in Corfe

We visit homes around Bishop Fox's School, White Hart Inn and Church of St Nicholas. Corfe’s nearest station is Taunton station, roughly 3.5 miles north. Further afield, we also cover the area around Orchard Shopping Centre (2.9 miles north) and Post Office Telecommunications Museum (2.8 miles north). For a walk, there is Bishopswood Meadows and Staple Hill.

Map of Corfe © OpenStreetMap contributors

Landlords, agents and businesses in Corfe

For anyone letting property in or around Corfe, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

We work for landlords, letting agents and housing providers in Corfe as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

When to call us in Corfe

Cut-outs for the sink and hob are the weakest parts, so cracks and chips frequently start there.

The most common problems we are called about are:

  • Scorch marks from pans
  • A chipped quartz edge
  • Knife marks
  • Chips caused during installation

What your quote should include

  • What happens if they find more damage
  • When it can be used again
  • Aftercare advice
  • Who turns up on the day

10 questions to ask before booking

Corfe questions

What happens if you find more damage?

The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Is a repair better than a new one?

Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

What areas do you cover?

All of Somerset, and the rest of the UK. Travel is included in the price.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.