Somerset · England
Bath Re-enamelling for Corfe homes
Bath re-enamelling in Corfe without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- A peeling or bubbling previous coating
Questions from Corfe
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Do you work in Corfe?
Yes. We work across the UK and travel to Corfe. Send photos and we will quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
About our bath re-enamelling in Corfe
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s chips and rust in more than one place and a bath that stays dull however much you clean it, we can usually put it right, whatever the material.
You get a one-year guarantee, the same in Corfe as everywhere else we work.
- Location
- Corfe (TA3)
- County
- Somerset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Corfe
We are used to working with agents and managing companies. Send the address, pictures and access details.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What else we do in Corfe
Where we work around Corfe
Corfe is about 3 miles south of Taunton, in Somerset. We visit customers in Corfe, so nothing has to leave your home. Our technicians cover all 640 towns and villages in Somerset.
We work across TA3. You’ll find streets such as Newton Court and Mill Lane, all of which we cover. Close by, we cover Netherclay (1 mile east), Staple Fitzpaine (2 miles south-east), Stoke St Mary (2 miles north-east), Bickenhall (3 miles east) and West Hatch (3 miles east). Further out, we also cover Taunton (3 miles north), Bridgwater (11 miles north), Chard (9 miles south-east), Wellington (6 miles west), Crewkerne (15 miles south-east) and Sydenham (12 miles north-east).
Local landmarks in Corfe
We visit homes around Bishop Fox's School, White Hart Inn and Church of St Nicholas. The nearest railway station is Taunton station, about 3.5 miles north. Further afield, we also cover the area around Orchard Shopping Centre (2.9 miles north) and Post Office Telecommunications Museum (2.8 miles north). For a walk, there is Bishopswood Meadows and Staple Hill.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When to call us in Corfe
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Contact us if you’ve noticed:
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Before you book anyone
- If travel is included in the price
- When it can be used again
- Aftercare advice
- Whether they match the colour on site
How to look after the repair
To keep it looking its best for years:
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs right away
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Open a window if you can
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
How to get a price
If you are in Corfe and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Repairing versus replacing in Corfe
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Corfe customers choose us
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
- A fixed quote before you book
- One price list for the entire UK
See our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price depends on:
- How many items we do on one visit
- The size and number of damaged areas
- The material
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Any earlier repairs or coatings
- Something in shot to show the size
- Your postcode, so we can check dates
- Any details about the material
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
