Powys · Wales
Worktop repair in Crossway, Powys
Worktop repair in Crossway without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A chipped edge
- Burns from hot pans
Worktop repair in Crossway without replacing anything
Burns from hot pans, chips on edges and scratches from knives are the most common worktop repairs. We repair them all in your kitchen. Our repair technicians work on solid wood, solid surface (such as Corian) and granite & marble, and people most often call us about dents and gouges and chips in quartz or granite.
Big or small, it’s backed by a one-year guarantee in Crossway and across Powys.
- Area
- Crossway (LD1)
- County
- Powys
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Crossway
Crossway is about 21 miles south of Y Drenewydd, in Powys. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Crossway is one of 234 towns and villages in Powys we cover. Our jobs stretch from Crossway to Birmingham (66 miles away).
Our visits in LD1 work the same way as everywhere else we cover. Nearby, we also work in Hawy (1 mile north), Llandrindod Wells (2 miles north), Gwystre (5 miles north), Llanbadarn Fawr (5 miles north-east) and Crossgates (5 miles north-east). Within a short drive, we also cover Llanfair-ym-Muallt (4 miles south), Rhayader (8 miles north-west), Llanelwedd (4 miles south) and Llanwrtyd Wells (13 miles south-west).
Near you in Crossway
In Crossway, that means homes near Llandrindod High School, St David's Church and Drovers Arms. For rail, the closest station is Llandrindod station, roughly 2.3 miles north. Nearby you’ll also find Disserth and Trecoed (0.9 miles west) and Llandrindod Wells Memorial Hospital (2.4 miles north). For a walk, there’s Pentrosta Mire and Poultry Farm Hill.
Repairs by material
Laminate
Laminate is a printed surface bonded to a board. Damage is filled and the pattern painted in by hand.
Wood
Timber tops can be sanded and refinished, and burns and dents repaired.
Landlords, agents and businesses in Crossway
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Powys and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
When we would advise against a repair
A repair is not right for every job, for example:
- Failed support under the worktop
- Laminate that has blown or swollen
- Through cracks in stone that is moving
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Solid wood
- Granite & marble
- Solid surface (such as Corian)
- Quartz
- Laminate
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Crossway. The price reflects:
- Whether old repairs or coatings need taking off
- How much damage there is
- Unusual colours or finishes
- Whether we combine several jobs
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from photos
You can normally get a fixed price without us visiting. To make it quick:
- Any details about the material
- A picture taken from further back
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Why repair rather than replace?
If the worktop is swollen by water or badly damaged along its length, replacement may be the answer. For chips, burns and scratches, repair is typically far better value. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Crossway
- We leave the room as we found it
- Honest advice, even when it means no job
- Colour mixed on the day to match
- Fixed prices from your pictures
See our prices page.
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a few hours, including clearing up.
- First, we check the damage and the finish we need to match.
- Burnt or loose material is cut back.
- We fill and shape the damaged area.
- We recreate the pattern, flecks or grain.
- We finish it to match the sheen and leave it to cure.
Getting ready for the visit
- Have a window or extractor fan available
- Ensure the area is dry
- Let us know about parking or access
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire worktop, we can price the job.
Related advice
Towns and villages near Crossway
More services for Crossway
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
FAQs for Crossway
How much does worktop repair cost in Crossway?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Which areas do you work in?
Across the UK, and that includes Crossway. Our prices are the same everywhere.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
When to call us in Crossway
Cut-outs for the sink and hob are the weakest parts, and that’s where cracks frequently begin.
Send us a photo if you notice any of these:
- Damage from fitting or building work
- Knife marks
- A heat mark or burn
- Chips near the sink
Before you book anyone
- Whether the price is fixed and includes VAT
- How soon you can use it again
- Who turns up on the day
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
