Powys · Wales
Bath re-enamelling & resurfacing in Crossway, Powys
We travel to Crossway for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
About our bath re-enamelling in Crossway
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a period or roll-top bath worth keeping and chips and rust in more than one place, on acrylic baths, cast iron baths and basins & shower trays.
We stand behind the work with a one-year guarantee.
- Where
- Crossway (LD1)
- County
- Powys
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for most of the day. Before leaving, we tell you how long to leave it and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Open a window if you can
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Getting a price
For a price in Crossway, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Crossway. The price comes down to:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- How much damage there is
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- One picture of the whole bath
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Repairing versus replacing in Crossway
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- No extra charge for your area
- A year’s guarantee on all work
- Colour-matched on site
- Dust sheets down, tidy finish
Take a look at our pricing and bath cost comparison.
Crossway and nearby
Crossway is about 21 miles south of Y Drenewydd, in Powys. We travel to clients in Crossway and the surrounding area, so nothing has to leave your home. Crossway is one of 234 towns and villages in Powys where we work. You can also see our page for Birmingham, about 66 miles away.
Our visits in LD1 work the same way as everywhere else we cover. Neighbouring places we cover include Hawy (1 mile north), Llandrindod Wells (2 miles north), Gwystre (5 miles north), Llanbadarn Fawr (5 miles north-east) and Crossgates (5 miles north-east). Within a short drive, we also cover Llanfair-ym-Muallt (4 miles south), Rhayader (8 miles north-west), Llanelwedd (4 miles south) and Llanwrtyd Wells (13 miles south-west).
What’s near Crossway
Typical jobs here are in homes near Llandrindod High School, St David's Church and Drovers Arms and the streets around them. The closest station to Crossway is Llandrindod station, roughly 2.3 miles north. Further afield, we also cover the area around Disserth and Trecoed (0.9 miles west) and Llandrindod Wells Memorial Hospital (2.4 miles north). Green spaces nearby include Pentrosta Mire and Poultry Farm Hill.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Also near Crossway
More services for Crossway
What we’re called out for in Crossway
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
Get in touch if you’ve noticed any of these:
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
What your quote should include
- A fixed price, and whether VAT is included
- Aftercare advice
- How the room is protected while they work
- Whether cleaning and preparation are in the price
Your questions about bath re-enamelling in Crossway
Do you work in Crossway?
Yes. We work across the UK and travel to Crossway and the rest of Powys. Send photos and we’ll quote, or call 0345 017 0787.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath re-enamelling cost in Crossway?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your LD1 postcode.
How long will the bath be out of use?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
For anyone letting property in or around Crossway, we’ll quote for several properties at once. Send photos for each one and we will price them together.
Honest limits
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
