Pembrokeshire · Wales
Worktop repair in Crunwere, Pembrokeshire
Local worktop repair for Crunwere: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Burns from hot pans
- A damaged sink edge
Covering Crunwere
Crunwere is about 14 miles north-east of Pembroke, in Pembrokeshire. From the centre of Crunwere to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 223 places across Pembrokeshire, from the larger towns to small villages.
We work across the SA67 and SA34 postcode area and the streets around it. We regularly work on streets such as Rectory Hill and Crunwere Close and the roads around them. We also cover the places around Crunwere: Llanteg (1 mile south-west), Tavernspite (1 mile north-west), Amroth (2 miles south), Ludchurch (3 miles west) and Lampeter Velfrey (3 miles north-west). We also work in nearby towns such as Haverfordwest (15 miles west), Pembroke (14 miles south-west), Pembroke Dock (14 miles west), The Marsh (15 miles west), Dinbych-y-Pysgod (7 miles south-west) and The Green (7 miles south-west).
Near you in Crunwere
In Crunwere, that means homes near Tavernspite C.P. School and St Elidyr's Church and the streets around them. Crunwere’s nearest station is Whitland station, about 3.6 miles north. Nearby you will also find Castle Ely (less than half a mile east). Open spaces near Crunwere include Marros Mountain.
Worktop repair in Crunwere without replacing anything
A new worktop rarely matches the old one, especially in an L-shaped or long kitchen. A repair leaves the kitchen untouched. Typical jobs include damage to a stone worktop and chips near the sink, in granite & marble, laminate and quartz.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Crunwere (SA67, SA34)
- Area hub
- Pembrokeshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- Severe heat marks in quartz
- Failed support under the worktop
- Laminate swollen by water from underneath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Crunwere
- Quartz
- Laminate
- Granite & marble
- Solid surface (such as Corian)
- Solid wood
Looking after it afterwards
Nothing complicated is needed:
- Steer clear of strong cleaners
- Re-oil timber worktops
- Take care with heavy pans near edges
- Keep a trivet by the hob
Leave the repaired area free of hot or heavy items until it has cured. After that, trivets and chopping boards protect it best.
Damage near the sink is worth repairing quickly, because water gets in and swells the board.
What happens on the day
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- The area around the damage is protected.
- The damage is cleaned and any loose material removed.
- We fill it and level it with the worktop.
- We recreate the colour and pattern by hand.
- The repair is sealed and polished to match.
Getting ready for the visit
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say right away whether it can be repaired.
Advice
What worktop repair costs
Prices start from £95. You’ll know the full cost before you book. We take into account:
- Doing more than one item at once
- How many areas need work
- The material
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Common problems we fix in Crunwere
The worst damage often happens in a moment: a hot pan set straight down, or a heavy pan catching the edge. Scratches build up more slowly, from knives and grit.
Look out for these signs:
- Damage from fitting or building work
- Burns from hot pans
- A damaged sink edge
- Dents and gouges
Before you book anyone
- How soon you can use it again
- Whether they match the colour on site
- How changes to the job are handled
- What aftercare is recommended
Crunwere: your questions answered
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
How much does worktop repair cost in Crunwere?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a picture of the whole item with your SA67 postcode.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Materials and what they mean for the repair
Solid surface
Solid surface tops are the same material all the way through, so marks can often be sanded and refinished.
Laminate
A laminate worktop is a thin decorative layer on a board. Damage is filled and the pattern painted in by hand.
Landlords, agents and businesses in Crunwere
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Nearby places to Crunwere
Also in Crunwere
About our accreditations · Every repair comes with a one-year guarantee.
