Somerset · England
Worktop repair in Dimmer, Somerset
Worktop repair in and around Dimmer: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chipped edge
- A chipped quartz edge

About our worktop repair in Dimmer
The hard part of a worktop repair is matching the pattern. We build up the colour and flecks by hand so the repair blends in. We’re often asked to fix knife marks and damage to a stone worktop, across granite & marble, solid wood and quartz.
Whatever the size of the job, you get the same one-year guarantee in Dimmer and across Somerset.
- Where
- Dimmer (BA7)
- Region
- Somerset
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026

Keeping it looking good
It’s all simple stuff:
- Use pH-neutral cleaners on stone
- Clean spills straight away
- Always use a trivet for hot pans
- Use a chopping board
Let the repair cure for the time we give you before putting anything heavy or hot on it. After that, trivets and chopping boards are your best protection.
A chip on an edge can grow, and water can reach the core of laminate. Repairing it early stops that.
Landlords, agents and businesses in Dimmer
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Towns and villages near Dimmer
More services for Dimmer
What we’re called out for in Dimmer
Cut-outs for the sink and hob are the weakest parts, so cracks and chips often start there.
Keep an eye out for any of the following:
- Chipped corners
- A chipped quartz edge
- A damaged sink edge
- Chips caused during installation
Questions to ask before booking
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
- How your room will be protected
- Whether they match the colour on site
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours for most jobs. We leave the room clean and you’ll know when it can be used.
- We assess the damage and the worktop material.
- We clean the area and prepare the edges of the damage.
- We fill with a filler suited to the material and rebuild any missing edge.
- The colour and pattern are matched by hand.
- Finally we seal or finish the area to match.
Preparing for the visit
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
How to get a price
For a price in Dimmer, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Materials and what they mean for the repair
Solid surface
Solid surface tops are the same material all the way through, so scratches and burns can often be sanded out and refinished.
Wood
Wooden worktops can be sanded, filled and re-oiled, with burns and dents put right.
FAQs for Dimmer
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Do you work in Dimmer?
Yes, we do. Technicians travel to Dimmer from across the region, with no extra charge for travel.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you match granite flecks?
Colour, flecks and veins are recreated by hand, for a repair that blends in.
Can a scorch mark be fixed?
Typically. Send us a picture and we will tell you what’s possible.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Should you replace it?
Stone and quartz have to be templated and cut, so replacing one section is a big job. A repair takes a few hours. Our worktop repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Colour-matched on site
- Work done at your home or business
- One-year guarantee on every repair
- Honest advice, even when it means no job
Take a look at our prices page.
Where we work around Dimmer
Dimmer is about 10 miles south-east of Wells, in Somerset. Whether you are in the middle of Dimmer or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Dimmer is one of 640 towns and villages in Somerset we cover.
Here we cover the BA7 postcode area. Nearby, we also work in Castle Cary (1 mile north-east), Small Way (1 mile south-east), Galhampton (2 miles south-east), North Town (2 miles south) and South Barrow (3 miles south-west). We also work in nearby towns such as Yeovil (10 miles south-west), Frome (14 miles north-east), Wells (10 miles north-west), Midsomer Norton (14 miles north), Shepton Mallet (7 miles north) and Street (9 miles west).
What’s near Dimmer
Locally, our jobs take us to homes close to Ansford Academy, Castle Cary Community Primary School and The Bay Tree pub, among other places. The closest station to Dimmer is Castle Cary station, roughly 1.3 miles north-east. Other landmarks nearby include Haynes Motor Museum (3.1 miles south). Open spaces near Dimmer include Lamyatt Beacon.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Deep heat discolouration in quartz, which may not fully disappear
- Through cracks in stone that is moving
- Failed support under the worktop
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Dimmer
- Laminate
- Granite & marble
- Solid surface (such as Corian)
- Quartz
- Solid wood
How we price worktop repair
Prices start from £95. There’s no area surcharge for Dimmer. The price reflects:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.

