Wiltshire · England

Worktop Repair in Erlestoke

Problem with your worktop in Erlestoke? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • A dent from a dropped pan
  • Damage around the sink cut-out
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair near Erlestoke

Worktop repair in Erlestoke without replacing anything

Burns from hot pans, chips on edges and scratches from knives make up most of our worktop work. All are repaired in place. Common call-outs are for burns from hot pans and a dent from a dropped pan, across quartz, granite & marble and solid wood.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Where
Erlestoke (SN10)
Area hub
Wiltshire
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Close-up of a technician filling damage on a solid wood worktop

Do you need worktop repair in Erlestoke?

Most chips are on edges and corners, frequently when something heavy catches the edge.

You may need us if you’ve spotted:

  • A heat mark or burn
  • A damaged sink edge
  • Scratches and knife marks
  • Snagging damage in a new kitchen

Before you book anyone

  • How long it needs to cure
  • What protection goes down before work starts
  • How the colour is matched
  • How to care for the finish

10 questions to ask before booking

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • Deep heat discolouration in quartz, which may not fully disappear
  • Water-swollen laminate
  • A cracked stone top that is unsupported

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Quartz
  • Laminate
  • Solid wood
  • Solid surface (such as Corian)
  • Granite & marble

The process

On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. The job generally runs to a few hours, including clearing up.

  1. We start by checking the damage and the worktop material.
  2. We clean the area and prepare the edges of the damage.
  3. We fill the damage with a suitable filler and build up any lost edge.
  4. The colour and pattern are matched by hand.
  5. The surface is sealed or finished to suit the worktop.

How to prepare

  • Mention any parking restrictions or tricky access
  • Plan for the room to be out of bounds to pets and children
  • Avoid using the area for a few hours before we arrive

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Related advice

Materials and what they mean for the repair

Quartz

Quartz is hard, but its edges are brittle. Chips are filled with tinted resin and polished.

Laminate

Laminate is a printed surface over a board. Chips and burns are filled and the pattern recreated by hand.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Prices and what affects them

Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:

  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • How much damage there is
  • How many items we do on one visit

We charge the same wherever you are, so there’s no premium for Erlestoke. The job itself decides the price: how much damage, what it’s made of and how many items.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Our work in Erlestoke

Erlestoke is about 6 miles south-west of Devizes, in Wiltshire. We travel to homes and businesses in Erlestoke and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover all 425 towns and villages in Wiltshire, from the larger towns to small villages.

Postcode districts we cover here: SN10. Jobs here include addresses on High Street, The Park and Lower Road. Erlestoke is on the B3098, so it’s easy for us to reach. Nearby, we also work in Great Cheverell (1 mile east), Little Cheverell (2 miles east), Marston (2 miles north), Edington (2 miles west) and Worton (2 miles north). Within a short drive, we also cover Trowbridge (7 miles west), Chippenham (12 miles north), Calne (11 miles north), Devizes (6 miles north-east), Westbury (6 miles west) and Melksham (7 miles north-west).

Local landmarks in Erlestoke

Typical jobs here are in homes near Erlestoke Park, Church of the Holy Saviour and The Holy Trinity Church of England Primary Academy, among other places. A little further out are Devizes Community Hospital (5.5 miles north-east) and Wiltshire Fire Defence And Brigades Museum (3.1 miles north-east). Green spaces nearby include West Lavington Down.

Map of Erlestoke © OpenStreetMap contributors

Your questions about worktop repair in Erlestoke

Do the materials smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

Can you repair something that is been repaired before?

Generally, yes. Tell us what was done before.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

How much do I need to move?

Just clear the area around the damage. We protect the rest of the kitchen.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Why repair rather than replace?

Even if you could get the same laminate, it may not match after years of light and use. We match the repair to your worktop as it is today. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • We leave the room as we found it
  • Honest advice, even when it means no job
  • Technicians who travel to you, UK-wide
  • Free fixed quotes from pictures

See our full price list.

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.