Gateshead · England

Worktop Repair in Follingsby

Problem with your worktop in Follingsby? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Chips caused during installation
  • A chipped quartz edge
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Follingsby homes

Do you need worktop repair in Follingsby?

Sink and hob cut-outs are weak points, so cracks and chips often start there.

Keep an eye out for any of the following:

  • A damaged sink edge
  • Gouges in the surface
  • A heat mark or burn
  • Chips on edges and corners

What your quote should include

  • What protection goes down before work starts
  • How long it needs to cure
  • Whether a trained technician does the job
  • What aftercare is recommended

How to compare quotes

About our worktop repair in Follingsby

Worktops are expensive to replace and hard to match, particularly where several lengths join. Repairing the damage keeps your kitchen as it is. If you’re dealing with snagging damage in a new kitchen and knife marks, we can usually put it right.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.

Where
Follingsby (NE10)
County
Gateshead
Warranty
One year on every repair
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Close-up of a technician filling damage on a solid wood worktop

Repairing versus replacing in Follingsby

A new worktop means removing the old one, cutting and fitting a new one and reconnecting the sink and hob, and it may not match the rest of the kitchen. A repair leaves the worktop in place. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why us?

  • A year’s guarantee on all work
  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do
  • One price list for the whole UK

Take a look at our full price list.

Follingsby and nearby

Follingsby is about 2 miles south of Hebburn, in Gateshead. Our repair technicians come to clients in Follingsby, so you don’t need to take anything anywhere. We cover 49 places across Gateshead, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 6 miles away.

Postcode districts we cover here: NE10. Jobs here include addresses on Follingsby Avenue, Follingsby Close and White Rose Way. If you’re just outside Follingsby, we cover Leam Lane Estate (1 mile west), Usworth (1 mile south-west), Pelaw (1 mile north-west), Bill Quay (1 mile north-west) and Heworth (2 miles north-west). Further out, we also cover Gateshead (3 miles west), Blaydon (8 miles west), Dunston (5 miles west), Whickham (7 miles west), Ryton (10 miles west) and Winlaton (8 miles west).

Local landmarks in Follingsby

We visit homes around Heworth Grange School, White Mere Community Primary School and Saint Andrew's Church, among other places. The nearest railway station is Heworth station, roughly 1.8 miles north-west. Other landmarks nearby include North East Bus Museum (1.1 miles north-west) and Galleries Shopping Centre (2.7 miles south). For a walk, there’s WWT Washington.

Map of Follingsby © OpenStreetMap contributors

Common questions in Follingsby

Are there extra charges for Follingsby?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

It’s been repaired before. Can you still fix it?

Normally, yes. We remove the old repair before doing a new one, so let us know about it.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can you quote from photos?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Work for landlords and builders

We regularly work with letting and managing agents. Send the address, photos and access details.

We carry out planned and one-off repairs for housing associations and facilities teams in Gateshead and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

What a repair can’t fix

A repair isn’t right for every job, including:

  • Laminate that has blown or swollen
  • A top that moves on its units
  • Severe heat marks in quartz

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Laminate
  • Granite & marble
  • Quartz
  • Solid wood
  • Solid surface (such as Corian)

How we price worktop repair

Prices start from £95. You’ll know the full cost before you book. We look at:

  • How hard the colour is to match
  • The material
  • Whether old repairs or coatings need taking off
  • Doing more than one item at once

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

How to get a fixed quote

Good photos mean an accurate price. Here’s what we find most useful:

  • Something in shot to show the size
  • What it’s made of, if you know
  • Details of any past repairs
  • A wider photo showing the entire worktop

The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.

What we do, step by step

There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.

  1. The area around the damage is protected.
  2. The damage is cleaned and any loose material removed.
  3. It’s filled and levelled with the surface.
  4. The colour and pattern are built up by hand.
  5. The repair is sealed and polished to match.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Keep children and pets away from the room on the day
  • Avoid using the area for a few hours before we arrive

Getting a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a free quote

Related advice

How to look after the repair

How the surface is treated afterwards matters:

  • Use pH-neutral cleaners on stone
  • Use a chopping board
  • Dry around the sink and joints
  • Don’t knock pans against the edge

Leave the repaired area free of hot or heavy items until it has cured. After that, trivets and chopping boards are your best protection.

A chip on an edge can grow, and on laminate, water can get into the core. An early repair prevents it.

Repairs by material

Wood

Timber tops can be sanded and refinished, with burns and dents put right.

Granite and stone

Granite and stone chip at edges and cut-outs. The repair is filled and polished to the stone’s finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.