Gwynedd · Wales

Worktop repair in Gwynedd

Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in Gwynedd and the surrounding area. Send photos for a free, fixed quote.

  • Repairs from £95
  • Damage around the sink cut-out
  • A chipped quartz edge
Surface Doctor technician repairing a wooden kitchen worktop

Trusted worktop repair in Gwynedd

What your worktop is made of matters

Wood

Timber tops can be sanded and refinished, and burns and dents repaired.

Granite and stone

Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.

Worktop repair at your home in Gwynedd

You do not need a new worktop because of one mark. The damage is filled and refinished so it blends into the pattern. We work on quartz, granite & marble and solid wood, and the jobs we see most are scratches and knife marks and chips caused during installation.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

Close-up of a technician filling damage on a solid wood worktop
Where
Gwynedd (LL44, LL43)
Region
Gwynedd
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

Do you need worktop repair in Gwynedd?

Kitchen worktops have a hard life. Hot pans scorch, knives leave scratches, and edges chip when heavy pans or tins hit them.

Customers typically contact us about:

  • A chipped edge
  • Scorch marks from pans
  • Damage from fitting or building work
  • Knife marks

Questions to ask before booking

  • Whether there are any call-out or travel charges
  • Who will actually do the work
  • Aftercare advice
  • How soon you can use it again

Our hiring checklist

Keeping it looking good

Once the work has cured, treat it gently:

  • Keep joints and edges dry
  • Use pH-neutral cleaners on stone
  • Re-oil timber worktops
  • Use a chopping board

Never put hot pans straight onto the worktop. Even stone and quartz can be marked by heat.

Daily use can make burns and chips worse. Repairing it sooner keeps the job smaller.

Honest limits

A few problems are outside what a surface repair can do:

  • Laminate that has blown or swollen
  • A worktop that has moved because its support has failed
  • A cracked stone top that’s unsupported

If in doubt, send photos and we will say what we think before you book.

Surfaces we repair

  • Granite & marble
  • Laminate
  • Solid wood
  • Solid surface (such as Corian)
  • Quartz

Covering Gwynedd

Gwynedd (Welsh: Gwynedd) is about 30 miles south of Bangor, in Gwynedd. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 165 towns and villages across Gwynedd. Our nearest city page is Liverpool, about 64 miles away.

Every address in LL44 and LL43 is within our area, from the main roads to the quietest streets. From Ffordd y Briwg, Ffordd y Llan and Ffordd Gors or a nearby road, we can come to you. We also cover the places around Gwynedd: Dyffryn Ardudwy (1 mile south-west), Llanddwywe-is-y-graig (1 mile south-east), Llanddwywe (1 mile south-west), Tal-y-bont (1 mile south) and Llanaber (4 miles south). Within a short drive, we also cover Tywyn (14 miles south), Pwllheli (15 miles north-west), Dolgellau (9 miles east), Porthmadog (10 miles north), Blaenau Ffestiniog (15 miles north-east) and Pen-dre (14 miles south).

What’s near Gwynedd

We visit homes around St Enddwyn's Church, Ael-y-Bryn Hotel and Ysgol Dyffryn Ardudwy, among other places. The nearest railway station is Dyffryn Ardudwy station, roughly 0.7 miles west of the centre. A little further out are Erwr Castell (1 mile west). Not far away are Llyn Irddyn and Moelfre.

Map of Gwynedd © OpenStreetMap contributors

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We work for landlords, letting agents and housing providers in Gwynedd as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

What affects the price in Gwynedd

Prices start from £95. Every quote is fixed and free. What we take into account:

  • The size and number of damaged areas
  • How hard the colour is to match
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear

The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.

How to get a fixed quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A picture taken from further back
  • Any earlier repairs or coatings
  • What it’s made of, if you know
  • A clear, close picture of the problem area

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire worktop, we can give you a fixed price the same day in most cases.

Gwynedd: your questions answered

Do you come to Gwynedd?

Yes. We cover the whole UK and come to Gwynedd. Send pictures and we’ll quote, or call 0345 017 0787.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

How much does worktop repair cost in Gwynedd?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

What information do you need?

A close-up, a wider photo and your postcode. Then we will agree a date.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is there any odour?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

What happens on the day

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.

  1. First, we check the damage and the finish we need to match.
  2. Burnt or loose material is cut back.
  3. The area is filled and shaped.
  4. The pattern, flecks or grain are recreated.
  5. We finish it to match the sheen and leave it to cure.

Getting ready for the visit

  • Open a window if you can
  • Let us know which floor the room is on
  • Mention any earlier repairs or resurfacing

How to get a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed quote

Read more

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.