Powys · Wales

Worktop repair in Hope, Powys

We travel to Hope for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Gouges in the surface
  • Burns from hot pans
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Hope homes

Different materials, different repairs

Quartz

Quartz is hard, but its edges are brittle. We fill chips with a tinted resin and polish them to the worktop’s finish.

Granite and stone

Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.

Worktop repair at your home in Hope

Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, matching the colour and pattern by hand. The worktop stays in place. Typical jobs include dents and gouges and damage from fitting or building work, across solid wood, granite & marble and solid surface (such as Corian).

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Location
Hope (SY21)
County
Powys
Guarantee
A year, on every repair
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Speckled stone tiles with chips repaired to match the pattern

How we price worktop repair

Prices start from £95. We price every job individually, from your photos. What matters most is:

  • The material
  • Access to the area
  • Any earlier repairs that need removing first
  • How hard the colour is to match

A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

How to get a fixed price

You can usually get a fixed price without us visiting. To help us price it:

  • Something in shot to show the size
  • A photo taken from further back
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the worktop, include your postcode and send them over. What comes back is a fixed quote, not a guess.

What we are called out for in Hope

Most chips are on edges and corners, generally from pans, tins or dishes knocked against them.

People typically call us after spotting something like this:

  • A heat mark or burn
  • Damage around the sink cut-out
  • Knife marks
  • Chips on edges and corners

Comparing quotes

  • Is the price fixed, and does it include VAT?
  • How long the guarantee is and what it covers
  • What happens if the damage is worse than the photos show
  • Whether there are any call-out or travel charges

How to compare quotes

Landlords, agents and businesses in Hope

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Questions from Hope

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What happens next?

We review the pictures and send a fixed quote.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What does worktop repair cost?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

How to care for the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Keep a trivet by the hob
  • Clean spills immediately
  • Use pH-neutral cleaners on stone
  • Re-oil timber worktops

Always use a trivet and chopping board, wipe spills right away, and re-oil wooden worktops regularly.

A chip on an edge can grow, and water can reach the core of laminate. Repairing it early stops that.

The process

Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. First we look at the damage and what the worktop is made of.
  2. Next we clean up and prepare the damaged area.
  3. A filler that suits the material goes in, and missing edges are rebuilt.
  4. We match the colour and pattern by hand.
  5. We seal or finish the surface to suit the worktop.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Make sure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole worktop, we can price the job the same day in most cases.

Get a fixed price

Read more

When a repair isn’t the answer

Not everything can be repaired, and we’d rather say so up front. We cannot fix:

  • Discolouration deep in quartz
  • Laminate that has blown or swollen
  • A top that moves on its units

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Granite & marble
  • Solid surface (such as Corian)
  • Solid wood
  • Quartz
  • Laminate

Our work in Hope

Hope is about 13 miles north-east of Y Drenewydd, in Powys. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Hope is one of 234 places in Powys we cover. We work right across the region, from Hope to Liverpool (about 52 miles away).

Jobs in SY21 work the same way as everywhere else we cover. Close by, we cover Tal-y-bont (1 mile north), Tre'r llai (1 mile west), Gungrog (1 mile north-west), Leighton (1 mile south) and Y Trallwng (2 miles west). Larger places within reach include Y Drenewydd (13 miles south-west), Newtown and Llanllwchaiarn (13 miles south-west), Penygloddfa (13 miles south-west), Pen-y-Glodfa (13 miles south-west), Bryn (13 miles south-west) and Cegidfa (3 miles north-west).

Landmarks near Hope

Locally, our jobs take us to homes close to Leighton C.P. School, Church of All Saints and Green Dragon Inn. For rail, the closest station is Welshpool station, roughly 1.4 miles west. Well-known places in the area include Victoria Memorial Hospital (1.6 miles west) and Buttington (0.9 miles north). Green spaces nearby include Long Mountain and Llyn Coed-y-Dinas.

Map of Hope © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.