Wiltshire · England

Worktop Repair for Horningsham homes

Worktop repair in and around Horningsham: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips caused during installation
  • Scratches and knife marks
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Horningsham homes

Worktop repair in Horningsham without replacing anything

A new worktop rarely matches the old one, especially in an L-shaped or long kitchen. Repairing the damage keeps your kitchen as it is. If you are dealing with chips caused during installation and chips on edges and corners, we can help.

Every job is backed for twelve months in Horningsham and everywhere else. If something goes wrong with the work, we come back.

Where
Horningsham (BA12)
County
Wiltshire
Warranty
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026
Wooden worktop being repaired in a customer’s kitchen

Your questions about worktop repair in Horningsham

Can I get a quote without a visit?

Nearly always. If pictures don’t show enough, we’ll ask for another angle.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Will the repair match a patterned worktop?

Yes. We recreate the pattern by hand.

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Is a burnt worktop repairable?

Frequently, yes. We remove the damaged surface, fill it and recreate the pattern.

What does worktop repair cost?

Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.

Is repairing better than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

What your worktop is made of matters

Granite and stone

Natural stone worktops chip at edges and around cut-outs. The repair is filled and polished to the stone’s finish.

Laminate

Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated by hand.

Should you replace it?

Even if you could get the same laminate, it may not match after years of light and use. A repair is matched to what you have now. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why book with us

  • Work done at your home or business
  • No need to remove anything
  • Colour mixed on the day to match
  • Fixed prices from your pictures

See our full price list.

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

What worktop repair costs

Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:

  • The size and number of damaged areas
  • Doing more than one item at once
  • The material
  • Previous DIY repairs that have to come out

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Quotes from your pictures

When you take your photos, these tips help us give you a firm price:

  • Good light, ideally daylight, without flash glare
  • A wider photo showing the entire worktop
  • Details of any past repairs
  • A coin beside the damage so we can judge size

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

What we cannot put right

In fairness, some problems need a different fix:

  • Through cracks in stone that is moving
  • Failed support under the worktop
  • Water-swollen laminate

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Solid wood
  • Quartz
  • Solid surface (such as Corian)
  • Granite & marble
  • Laminate

The process

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a few hours. Before leaving, we tell you when it can be used and how to care for it.

  1. We look at the damage and the worktop’s finish.
  2. We cut back any burnt or loose material.
  3. We fill and shape the damaged area.
  4. We recreate the pattern, flecks or grain.
  5. It’s finished to the same sheen and left to cure.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Keep a parking space free if you can
  • Make sure the area is dry

How to get a price

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Send photos for a quote

Related advice

Covering Horningsham

Horningsham is about 4 miles south-west of Warminster, in Wiltshire. From the centre of Horningsham to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 425 places in Wiltshire.

Our repair technicians cover all of BA12. From Chapel Street, Water Lane and Cock Road or a nearby road, we can come to you. Nearby, we also work in Newbury (1 mile east), Maiden Bradley (2 miles south), Gare Hill (2 miles west), Cole Hill (2 miles north-west) and Chatter Alley (2 miles north-east). Larger places within reach include Trowbridge (11 miles north), Westbury (7 miles north-east), Melksham (15 miles north-east), Warminster (4 miles north-east), Bradford-on-Avon (12 miles north) and Paxcroft Mead (11 miles north).

Landmarks near Horningsham

Typical jobs here are in homes near Church of St John the Baptist, The Bath Arms and Horningsham Primary School, among other places. Horningsham’s nearest station is Frome station, about 4.2 miles north-west of the centre. For a walk, there is Shearwater and Cley Hill.

Map of Horningsham © OpenStreetMap contributors

Keeping it looking good

So the finish stays in good condition:

  • Keep joints and edges dry
  • Take care with heavy pans near edges
  • Use a chopping board
  • Never put hot pans down directly

Let the repair cure for the time we give you before putting anything heavy or hot on it. After that, trivets and chopping boards are your best protection.

A chip on an edge can grow, and on laminate, water can get into the core. An early repair prevents it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.