Wirral · England
Worktop repair in Irby Hill, Wirral
Chip, burn and scratch repairs to kitchen and bathroom worktops in Irby Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scratches and knife marks
- Dents and gouges
How we handle worktop repair in Irby Hill
You don’t need a new worktop because of one mark. The damage is filled and refinished so it blends into the pattern. We are frequently asked to fix chips near the sink and knife marks, in granite & marble, quartz and solid surface (such as Corian).
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Location
- Irby Hill (CH61, CH48)
- Area hub
- Wirral
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Signs you need worktop repair in Irby Hill
Sink and hob cut-outs are weak points, so cracks and chips frequently start there.
The most common problems we are called about are:
- Damage around the sink cut-out
- Cuts and scratches in the surface
- Dents and gouges
- Chips caused during installation
What to look for in a quote
- Aftercare advice
- Whether they match the colour on site
- A fixed price, and whether VAT is included
- How the room is protected while they work
What happens on the day
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.
- The area around the damage is protected.
- We clean the damage and remove anything loose.
- It’s filled and levelled with the surface.
- The colour and pattern are built up by hand.
- The repair is sealed and polished to match.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Keep pets and children out of the room while we work
Get a quote
For a price in Irby Hill, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Prices and what affects them
Prices start from £95. You will not pay by the hour. The price is based on:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How many areas need work
- The material
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
When you take your photos, a few simple things make all the difference:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Natural light rather than flash
- A picture taken from further back
Send us a photo of the damage and one of the entire item, and tell us you are in Irby Hill, and we will come back with a fixed quote.
Your questions about worktop repair in Irby Hill
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can a scorch mark be fixed?
Typically, yes. The burn is cut back, filled and patterned to match.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you work in Irby Hill?
Yes, we do. Technicians travel to Irby Hill from across the region, with no extra charge for travel.
How do I get a price for worktop repair in Irby Hill?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do I need to empty the worktop?
Only around the repair. You can generally still use the rest of the kitchen.
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Discolouration deep in quartz
- Laminate that has blown or swollen
- Cracks right through stone that has moved
Send us pictures and we’ll tell you honestly.
What we work on
- Granite & marble
- Laminate
- Quartz
- Solid wood
- Solid surface (such as Corian)
Why repair rather than replace?
Stone and quartz tops are templated and cut to fit, so replacing one section is a big job. Repairing it is a few hours’ work. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Irby Hill
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Rooms protected and left tidy
- One-year guarantee on every repair
Take a look at our full price list.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Clean spills straight away
- Don’t cut directly on the worktop
- Do not knock pans against the edge
- Oil wooden tops regularly
Use chopping boards and trivets, wipe spills immediately, and keep wooden tops oiled.
Damage near the sink is worth repairing quickly, because water gets in and swells the board.
Our work in Irby Hill
Irby Hill is about 2 miles east of West Kirby, in Wirral. From the centre of Irby Hill to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 44 towns and villages in Wirral. Our nearest city page is Liverpool, about 9 miles away.
Every address in CH61 and CH48 is covered, from the main roads to the quietest streets. From Sandy Lane North, Mill Hill Road and Hillbark Road or anywhere nearby, a technician can come to you. We also cover the places around Irby Hill: Frankby (1 mile north-west), Thurstaston (1 mile south), Greasby (1 mile north), Larton (1 mile north-west) and Newton (1 mile north-west). We also work in nearby towns such as Birkenhead (3 miles north-east), Wallasey (5 miles north-east), Bebington (6 miles east), Moreton (3 miles north), Bromborough (6 miles east) and Lower Bebington (5 miles east).
Local landmarks in Irby Hill
Our customers here include homes close to Irby Mill pub, Royden Park and Hilbre High School. Other local landmarks include Greasby Junior School (0.5 miles north) and St Chad's (0.8 miles south-east). For rail, the closest station is Upton station, roughly 2.3 miles north-east of the centre. Nearby you will also find Heswall cum Oldfield (2.4 miles south) and Leasowe Castle (3.8 miles north). Not far away are New Ferry Butterfly Park and West Kirby Marine Lake.
Towns and villages near Irby Hill
More services for Irby Hill
Different materials, different repairs
Solid surface
Solid surface tops are the same material all the way through, so marks can frequently be sanded and refinished.
Laminate
Laminate worktops have a printed decorative layer over a board core. We fill the damage and recreate the pattern.
About our accreditations · Every repair comes with a one-year guarantee.
