Argyll and Bute · Scotland
Worktop Repair for Kilmun homes
Damaged worktop in Kilmun? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Dents and gouges
- Chipped corners
About our worktop repair in Kilmun
You do not need a new worktop because of one mark. The damage is filled and refinished so it blends into the pattern. If you’re dealing with a damaged sink edge and scratches and knife marks, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Kilmun (PA23)
- Area hub
- Argyll and Bute
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
To keep it looking its best for years:
- Watch the edges with heavy pans
- Dry around the sink and joints
- Wipe up spills quickly
- Always use a trivet for hot pans
Hot pans should always go on a trivet. Even stone and quartz can be marked by heat.
A burn or chip can get worse with daily use particularly around the sink. An earlier repair is a smaller repair.
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
How the visit works
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The area around the damage is protected.
- We clean the damage and remove anything loose.
- It’s filled and levelled with the surface.
- We recreate the colour and pattern by hand.
- We seal and polish it to the right sheen.
Before we arrive
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole worktop, we can price the job without visiting.
Read more
Signs you need worktop repair in Kilmun
Sink and hob cut-outs are weak points, and that’s where cracks frequently begin.
Typical reasons for a call-out include:
- Cuts and scratches in the surface
- A heat mark or burn
- Damage from fitting or building work
- Gouges in the surface
Questions to ask before you book
- Who will actually do the work
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
- Whether the price covers travel
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
FAQs for Kilmun
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Is a burnt worktop repairable?
Normally, yes. The burn is cut back, filled and patterned to match.
Can you quote from pictures?
In nearly every case. If photos do not show enough, we will ask for another angle.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Can you match granite flecks?
We match colour, flecks and veining by hand, so the repair blends into the surface.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Are there extra charges for Kilmun?
There is no separate call-out charge. Your fixed price includes everything.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Covering Kilmun
Kilmun is about 7 miles north-west of Greenock, in Argyll and Bute. Anywhere in PA23, we come to you. Kilmun is one of 118 towns and villages in Argyll and Bute we cover. We work right across the region, from Kilmun to Glasgow (28 miles away).
Postcode districts we cover here: PA23. Local streets include Midge Lane, Shore Road and Graham's Point, all of which we cover. Main roads around Kilmun include the A880, which makes travel easy. Nearby, we also work in Tom nan Ragh (1 mile west), Sandbank (1 mile south), Strone (2 miles south-east), Hunters Quay (3 miles south-east) and Kirn (3 miles south-east). Further out, we also cover Helensburgh (8 miles east), Rothesay (12 miles south), Rhu (7 miles east), Garelochhead (7 miles north-east), Port Bannatyne (11 miles south-west) and Innellan (7 miles south). Some remote addresses need extra planning, so it’s best to call first.
Around Kilmun
Typical jobs here are in homes near Dunoon Grammar School and St Munn's Parish Church. Well-known places in the area include Castle House Museum (3.5 miles south) and Cowal Community Hospital (2.6 miles south). Not far away are Loch Loskin and Clach Bheinn.
What affects the price in Kilmun
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Previous DIY repairs that have to come out
- How much damage there is
Our prices are the same across the UK, so there’s no premium for Kilmun. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- The material, if you know it
If you are in Kilmun and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Also near Kilmun
Other services in Kilmun
Repairs by material
Solid surface
Solid surface materials are uniform throughout, so marks can frequently be sanded and refinished.
Quartz
Quartz worktops are mostly stone set in resin. We fill and polish chipped edges to match the sheen.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Laminate swollen by water from underneath
- Discolouration deep in quartz
- Cracks right through stone that has moved
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Solid surface (such as Corian)
- Laminate
- Granite & marble
- Quartz
- Solid wood
About our accreditations · Every repair comes with a one-year guarantee.
