Shropshire · England
Worktop repair in Newcastle, Shropshire
Problem with your worktop in Newcastle? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Knife marks
- Dents and gouges
Worktop repair in Newcastle, done in place
We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, matching the colour and pattern by hand. Nothing is taken out. We work on solid surface (such as Corian), quartz and laminate, and the jobs we see most are a chipped edge and knife marks.
Every repair comes with a one-year guarantee.
- Location
- Newcastle (SY7)
- County
- Shropshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Newcastle
Newcastle is about 10 miles south-east of Y Drenewydd, in Shropshire. Whether you are in the middle of Newcastle or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Newcastle is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 51 miles away.
Our visits in SY7 work the same way as everywhere else we cover. That includes homes on Church Road, Mill Road and West Road and the roads around them. Close by, we cover Mardu (2 miles north-east), Whitcott Keysett (2 miles east), Llwyn (3 miles south-east), Clun (3 miles east) and Churchbank (3 miles east). Larger places within reach include Church Stretton (15 miles north-east), Craven Arms (11 miles east), Bishop's Castle (6 miles north-east) and Halford (12 miles east).
Landmarks near Newcastle
We visit homes around The Crown Inn, Newcastle CofE Primary School and Church of St John. A little further out are Clun Town Trust Museum (3.3 miles east) and Pantycaregl (3.7 miles south-west). For a walk, there is Shadwell Hill.
Common problems we fix in Newcastle
Kitchen worktops have a hard life. Hot pans leave burns, knives cut, and edges chip when heavy pans or tins hit them.
Most people contact us when they notice one of these:
- Gouges in the surface
- Chipped corners
- Knife marks
- A heat mark or burn
Questions to ask before you book
- How soon you can use it again
- If travel is included in the price
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Newcastle, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Also near Newcastle
More services for Newcastle
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What your worktop is made of matters
Granite and stone
Granite and stone chip at edges and cut-outs. The repair is filled and polished to the stone’s finish.
Laminate
Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated by hand.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- We assess the damage and the worktop material.
- Next we clean up and prepare the damaged area.
- A filler that suits the material goes in, and missing edges are rebuilt.
- The colour and pattern are matched by hand.
- Finally we seal or finish the area to match.
How to prepare
- Point us to the nearest place to park
- Make sure the room can be ventilated
- Let us know if it has been repaired before
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
What we can’t put right
It helps to know what we can’t do too:
- Discolouration deep in quartz
- Water-swollen laminate
- Cracks right through stone that has moved
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Solid wood
- Solid surface (such as Corian)
- Granite & marble
- Laminate
- Quartz
Your questions about worktop repair in Newcastle
Can you repair a chipped quartz worktop?
Yes, frequently. We match the colour and polish the repair.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you match the pattern on my worktop?
Yes. We recreate the pattern by hand.
Which areas do you work in?
The entire UK, including all of Shropshire. Send your postcode with your pictures and we’ll offer you dates.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a burn in a worktop?
Typically, yes. We remove the damaged surface, fill it and recreate the pattern.
Repairing versus replacing in Newcastle
A new worktop means removing the old one, templating and fitting a replacement and reconnecting the sink and hob, and matching the rest of the kitchen can be hard. Repairing the damage leaves the worktop in place. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- One-year guarantee on every repair
- Most jobs done in one visit
- Colour mixed on the day to match
- CHAS and Constructionline accredited
See our prices page.
What affects the price in Newcastle
Prices start from £95. We charge the same across the UK, including Newcastle. The price reflects:
- How hard the colour is to match
- The material
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- One sharp close-up of the damage
- One picture of the entire worktop
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
For a price in Newcastle, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
