Bridgend · Wales
Worktop Repair in Ogmore Vale
Chip, burn and scratch repairs to kitchen and bathroom worktops in Ogmore Vale, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage to a stone worktop
- A damaged sink edge
Landlord and trade work in Ogmore Vale
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our worktop repair in Ogmore Vale
You do not need a new worktop because of one mark. The damage is filled and refinished so it blends into the pattern. We’re often asked to fix snagging damage in a new kitchen and chips on edges and corners, in solid wood, laminate and granite & marble.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Ogmore Vale (CF32)
- Region
- Bridgend
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Ogmore Vale
What else we do in Ogmore Vale
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Laminate swollen by water from underneath
- A cracked stone top that is unsupported
- Discolouration deep in quartz
Send us photos and we’ll tell you honestly.
Materials we repair
- Granite & marble
- Solid wood
- Laminate
- Quartz
- Solid surface (such as Corian)
Our work in Ogmore Vale
Ogmore Vale (Welsh: Cwm Ogwr) is about 4 miles south-west of Rhondda, in Bridgend. Anywhere in CF32, we come to you. Ogmore Vale is one of 91 places in Bridgend where we work.
Our visits in CF32 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Railway Terrace and Blandy Terrace. We also cover the places around Ogmore Vale: Wyndham (1 mile north), Price Town (1 mile north), Nant-y-moel (2 miles north), Pontycymer (2 miles north-west) and Blaengarw (3 miles north-west). We also work in nearby towns such as Bridgend (6 miles south), Maesteg (5 miles west), Porthcawl (11 miles south-west), Newcastle Higher (7 miles south), Ynysawdre (4 miles south-west) and Pencoed (5 miles south).
Landmarks near Ogmore Vale
In Ogmore Vale, that means homes near Ogmore Vale Primary, Fox & Hounds pub and St David's Church, among other places. For rail, the closest station is Ton Pentre station, roughly 4.1 miles north-east. A little further out are Llwynypia Hospital (4.8 miles north-east) and Moel Garn (1.4 miles north-west). Open spaces near Ogmore Vale include Pant Blaenhirwr.
Why repair rather than replace?
Even if you could get the same laminate, it may not match after years of light and use. We match the repair to your worktop as it is today. Repairs from £95, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Everything repaired in place
- Straight answers about what a repair can do
- We leave the room as we found it
- We come to you, anywhere in the UK
Read our full price list.
Keeping it looking good
Once the work has cured, treat it gently:
- Do not let water sit on joints
- Avoid harsh chemicals on stone and quartz
- Always use a trivet for hot pans
- Do not knock pans against the edge
Hot pans should always go on a trivet. Heat can mark quartz and stone as well.
Damage near the sink is worth repairing quickly, because water gets in and swells the board.
Prices and what affects them
Prices start from £95. You will not pay by the hour. The price is based on:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- The material
- Whether we combine several jobs
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- A wider photo showing the whole worktop
- Any details about the material
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
Upload a photo of the damage and a wider shot of the whole item, with your CF32 postcode, and we’ll reply with a fixed price.
Signs you need worktop repair in Ogmore Vale
Cut-outs for the sink and hob are the weakest parts, and that’s where cracks often begin.
Signs it’s time to call us include:
- Damage to a stone worktop
- Chipped corners
- Gouges in the surface
- Chips caused during installation
Comparing quotes
- How the colour is matched
- Whether a trained technician does the job
- If travel is included in the price
- How the room is protected while they work
Repairs by material
Granite and stone
Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.
Solid surface
Solid surface tops are the same material all the way through, so scratches and burns can often be sanded out and refinished.
Ogmore Vale questions
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Do I need to empty the worktop?
Just near the damage. You can normally still use the rest of the kitchen.
What happens next?
We come back with a fixed quote, plus dates. You are under no obligation.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Will the repair match a patterned worktop?
We match colour, flecks and veining by hand, so the repair blends into the surface.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is a burnt worktop repairable?
Typically, yes. The burn is cut back, filled and patterned to match.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours for most jobs. The room is left tidy.
- First, we check the damage and the finish we need to match.
- Burnt or loose material is cut back.
- The area is filled and shaped.
- The pattern, flecks or grain are recreated.
- We finish it to match the sheen and leave it to cure.
Preparing for the visit
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole worktop, we can price the job the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
