Perth and Kinross · Scotland
Worktop repair in Old Struan, Perth and Kinross
Damaged worktop in Old Struan? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips caused during installation
- Damage around the sink cut-out
Worktop repair at your home in Old Struan
We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, matching the colour and pattern by hand. Nothing is taken out. We work on laminate, solid wood and granite & marble, and people most often call us about snagging damage in a new kitchen and knife marks.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Old Struan (PH18)
- Area hub
- Perth and Kinross
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Old Struan
For anyone letting property in or around Old Struan, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Your questions about worktop repair in Old Struan
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you work in Old Struan?
Yes. We cover the whole UK and come to Old Struan. Send us photos for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Do I need to empty the worktop?
Only around the repair. You can usually still use the rest of the kitchen.
Can a scorch mark be fixed?
Normally, yes. The burn is cut back, filled and patterned to match.
What affects the price in Old Struan
Prices start from £95. Every quote is fixed and free. What we take into account:
- The material and finish
- How hard the colour is to match
- Previous DIY repairs that have to come out
- The size and number of damaged areas
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can usually get a fixed quote without us visiting. To help us price it:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- A photo taken from further back
- Natural light rather than flash
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
What your worktop is made of matters
Granite and stone
Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.
Solid surface
Solid surface materials are uniform throughout, so marks can frequently be sanded and refinished.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Failed support under the worktop
- A cracked stone top that’s unsupported
- Water-swollen laminate
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Old Struan
- Quartz
- Laminate
- Solid wood
- Solid surface (such as Corian)
- Granite & marble
When to call us in Old Struan
Worktops take more punishment than anything else in the kitchen. Hot pans scorch, knives cut, and edges chip when heavy pans or tins hit them.
People typically call us after spotting something like this:
- A dent from a dropped pan
- A damaged sink edge
- Scorch marks from pans
- Cuts and scratches in the surface
Comparing quotes
- How to care for the finish
- What protection goes down before work starts
- If travel is included in the price
- What the guarantee covers, and for how long
Also near Old Struan
Also in Old Struan
Should you replace it?
Swollen or badly damaged laminate may need replacing. For chips, burns and scratches, a repair is the better value. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Old Struan customers choose us
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Everything repaired in place
- Dust sheets down, tidy finish
Read our full price list.
Our work in Old Struan
Old Struan is about 26 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Our technicians come to homes and businesses in Old Struan and nearby villages, so you don’t need to take anything anywhere. Old Struan is one of 107 towns and villages in Perth and Kinross we cover. We work right across the region, from Old Struan to Edinburgh (about 63 miles away).
Jobs in PH18 work the same way as everywhere else we cover. Nearby, we also work in Old Blair (4 miles east), Bridge of Tilt (4 miles east), Blair Atholl (4 miles east), Trinafour (5 miles west) and Moulin (9 miles east). Some remote addresses need extra planning, so it’s best to call first.
What’s near Old Struan
Around Old Struan, we work in homes near Struan Church. For rail, the closest station is Blair Atholl station, roughly 3.9 miles east. A little further out are Clan Donnachaidh Museum (0.9 miles north-east) and Blair Castle (3.7 miles east). Green spaces nearby include Creag Odhar and Loch Bhac.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Take care with heavy pans near edges
- Don’t cut directly on the worktop
- Oil wooden tops regularly
- Dry around the sink and joints
Keep joints and the sink edge dry, particularly with laminate and timber.
Edge chips can get bigger, and on laminate, water can get into the core. Repairing it early stops that.
How it works
Arrival times are agreed in advance. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- First, we check the damage and the finish we need to match.
- Burnt or loose material is cut back.
- We fill and shape the damaged area.
- The pattern, flecks or grain are recreated.
- It’s finished to the same sheen and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
Ask for a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
