Perth and Kinross · Scotland
Bath Repair for Old Struan homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Old Struan. Free, fixed quotes from your pictures.
- Repairs from £95
- Rusty patches near the plughole
- Chips caused by builders
What affects the price in Old Struan
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- What kind of damage it is
- The size and number of damaged areas
- Where the damage is and how we get to it
- Unusual colours or finishes
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
You can take the pictures on your phone. Ensure they show:
- A wider photo showing the whole bath
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
Send us a picture of the damage and one of the whole item, with your PH18 postcode, and we’ll come back with a fixed quote.
Bath repair at your home in Old Struan
You do not need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. Common call-outs are for hairline or through cracks in acrylic and chips along the edge of the bath, in roll-top & freestanding, whirlpool & spa baths and acrylic.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Old Struan (PH18)
- Area hub
- Perth and Kinross
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Give the bath a quick rinse after use
- Ensure an acrylic bath is firm underfoot
- Don’t leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Questions from Old Struan
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What we do, step by step
Arrival times are agreed in advance. On site, it takes a few hours, depending on the damage. The room is left tidy and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Let us know which floor the room is on
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Read more
What we are called out for in Old Struan
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Get in touch if you’ve noticed any of these:
- A cracked acrylic bath
- Rusty patches near the plughole
- Damage beneath the taps
- Chips caused by builders
What your quote should include
- How changes to the job are handled
- Who turns up on the day
- What prep work is covered
- How the colour is matched
Landlords, agents and businesses in Old Struan
Housing associations and facilities teams use us for planned and reactive repairs in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Also near Old Struan
What else we do in Old Struan
Old Struan and nearby
Old Struan is about 26 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH18, a technician comes to you. We cover 107 places across Perth and Kinross. You can also see our page for Edinburgh, about 63 miles away.
All of PH18 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Old Blair (4 miles east), Bridge of Tilt (4 miles east), Blair Atholl (4 miles east), Trinafour (5 miles west) and Moulin (9 miles east). Remote and island addresses take a little more planning, so it’s best to call first.
Landmarks near Old Struan
We visit homes around Struan Church and the streets around them. The closest station to Old Struan is Blair Atholl station, roughly 3.9 miles east of the centre. Well-known places in the area include Clan Donnachaidh Museum (0.9 miles north-east) and Blair Castle (3.7 miles east). Green spaces nearby include Creag Odhar and Loch Bhac.
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly.
Materials we work on in Old Struan
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
