Somerset · England
Worktop repair in Porlock Weir, Somerset
Chip, burn and scratch repairs to kitchen and bathroom worktops for homeowners, landlords and businesses in Porlock Weir. Send pictures for a free, fixed quote.
- Repairs from £95
- Chipped corners
- A dent from a dropped pan
What a repair can’t fix
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- A cracked stone top that is unsupported
- Water-swollen laminate
- Deep heat discolouration in quartz, which may not fully disappear
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Solid surface (such as Corian)
- Solid wood
- Quartz
- Laminate
- Granite & marble
About our worktop repair in Porlock Weir
Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, matching the colour and pattern by hand. The worktop stays in place. We are frequently asked to fix snagging damage in a new kitchen and damage to a stone worktop, on quartz, solid surface (such as Corian) and granite & marble.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Porlock Weir (TA24)
- County
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Other services in Porlock Weir
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Use a chopping board
- Re-oil timber worktops
- Use pH-neutral cleaners on stone
- Take care with heavy pans near edges
Never put hot pans straight onto the worktop. Even stone and quartz can be marked by heat.
Daily use can make burns and chips worse. Repairing it sooner keeps the job smaller.
What affects the price in Porlock Weir
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- The type of damage
- How many items we do on one visit
- How much damage there is
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Phone pictures are fine. Ensure they show:
- A picture taken from further back
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
When to call us in Porlock Weir
Most chips are on edges and corners, often when something heavy catches the edge.
Customers generally contact us about:
- Scratches and knife marks
- Chipped corners
- Damage around the sink cut-out
- Snagging damage in a new kitchen
Comparing quotes
- How your room will be protected
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- What happens if they find more damage
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, including clearing up.
- First, we check the damage and the finish we need to match.
- We cut back any burnt or loose material.
- The area is filled and shaped.
- We recreate the pattern, flecks or grain.
- It’s finished to the same sheen and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Make sure the room can be ventilated
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire worktop, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Repair or replace in Porlock Weir?
Replacing a worktop means removing the old one, cutting and fitting a new one and refitting the sink and hob, and it may not match the rest of the kitchen. Repairing the damage keeps your existing worktop. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Porlock Weir customers choose us
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
Take a look at our pricing.
Materials and what they mean for the repair
Quartz
Quartz is tough, though edges can chip. Chips are filled with tinted resin and polished to the worktop’s finish.
Granite and stone
Granite and stone chip at edges and cut-outs. The repair is filled and polished to the stone’s finish.
Common questions in Porlock Weir
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you repair a burn in a worktop?
Frequently, yes. We remove the damaged surface, fill it and recreate the pattern.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Porlock Weir and the surrounding area
Porlock Weir is about 7 miles west of Minehead, in Somerset. Whether you’re in the middle of Porlock Weir or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Porlock Weir is one of 640 towns and villages in Somerset where we work.
Our technicians cover all of the TA24 postcode area. Whether you live on Worthy Toll Road and Dunster Steep or a nearby road, we can come to you. We also cover the places around Porlock Weir: Porlock (2 miles east), Bossington (2 miles east), Allerford (2 miles east), Luccombe (3 miles south-east) and Bratton (5 miles east). Within a short drive, we also cover Minehead (7 miles east), Watchet (13 miles east), Williton (14 miles east), Dulverton (13 miles south) and Dunster (8 miles east).
What’s near Porlock Weir
We visit homes around The Ship Inn and St Nicholas. Further afield, we also cover the area around Exmoor Classic Car Museum (1.5 miles south-east). The countryside around Porlock Weir includes Culbone Hill.
About our accreditations · Every repair comes with a one-year guarantee.
