Herefordshire · England
Worktop repair in Portway, Herefordshire
Damaged worktop in Portway? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- A chipped edge
- Scratches and knife marks
Worktop repair in Portway, done in place
Matching a pattern is the skilled part of a worktop repair. Colour, flecks and veining are recreated by hand so the repair blends in. If you are dealing with chips near the sink and chips caused during installation, we can usually put it right, whatever the material.
Every job is backed for twelve months in Portway and everywhere else. We return to put right any problem with the work.
- Where
- Portway (HR4)
- Area hub
- Herefordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a few hours, depending on the damage from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We assess the damage and the worktop material.
- We clean the area and prepare the edges of the damage.
- We fill with a filler suited to the material and rebuild any missing edge.
- We recreate the colour and pattern by hand.
- We seal or finish the surface to suit the worktop.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Get a quote
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Other services in Portway
Portway and the surrounding area
Portway is about 3 miles north of Hereford, in Herefordshire. Our technicians come to customers in Portway and nearby villages, so nothing has to leave your home. Portway is one of 255 towns and villages in Herefordshire we cover. Our jobs stretch from Portway to Birmingham (about 44 miles away).
Here we cover the HR4 postcode area. If you’re just outside Portway, we cover Moreton on Lugg (1 mile north-east), Tillington (2 miles west), Auberrow (2 miles north), Tillington Common (2 miles north-west) and Wellington (2 miles north). Within a short drive, we also cover Hereford (3 miles south), Ross-on-Wye (15 miles south-east), Ledbury (14 miles east), Leominster (9 miles north), Redhill (4 miles south) and Newton Farm (4 miles south).
Near you in Portway
Our clients here include homes close to Whitecross Hereford and Church of St Mary, among other places. The nearest railway station is Hereford station, about 3.1 miles south-east. A little further out are St. Mary's Hospital (1 mile south-west) and Dinmore Preceptory (3.4 miles north). Green spaces nearby include Wyevale Wood and Merryhill.
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- Any earlier repairs that need removing first
- The material
- Unusual colours or finishes
- Doing more than one item at once
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
Two or three clear photos are typically enough. Try to include:
- Where you are, by postcode
- A clear, close picture of the problem area
- One picture of the whole worktop
- Something in shot to show the size
Upload a picture of the damage and a wider shot of the whole item, with your HR4 postcode, and we’ll reply with a fixed quote.
What we cannot put right
We’ll always be straight with you, so here’s what a repair will not do:
- Cracks right through stone that has moved
- Severe heat marks in quartz
- Laminate that has blown or swollen
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Solid wood
- Solid surface (such as Corian)
- Quartz
- Laminate
- Granite & marble
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Landlord and trade work in Portway
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Looking after it afterwards
Looking after the surface is easy:
- Chopping boards prevent scratches
- Do not knock pans against the edge
- Always use a trivet for hot pans
- Oil wooden tops regularly
Wipe water away from joints and around the sink, particularly with laminate and timber.
A burn or chip can get worse with daily use. Repairing it sooner keeps the job smaller.
Questions from Portway
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Portway.
Should you replace it?
Replacing even one length of worktop means templating, cutting, fitting and often a new sink and hob connection. A repair is a few hours with everything left in place. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Portway
- One price list for the entire UK
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- No need to remove anything
Take a look at our pricing.
When to call us in Portway
Sink and hob cut-outs are weak points, so cracks and chips frequently start there.
People normally call us when they notice one of these:
- Gouges in the surface
- Chips in quartz or granite
- A heat mark or burn
- Knife marks
What to look for in a quote
- Whether they match the colour on site
- How soon you can use it again
- What happens if they find more damage
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
