North Yorkshire · England
Worktop repair in Raw, North Yorkshire
Chip, burn and scratch repairs to kitchen and bathroom worktops for householders, landlords and businesses in Raw. Send pictures for a free, fixed quote.
- Repairs from £95
- Dents and gouges
- Chips in quartz or granite
Raw and the surrounding area
Raw is about 4 miles south-east of Whitby, in North Yorkshire. We travel to homes and businesses in Raw and the surrounding area, so there is no workshop to go to. Raw is one of 626 towns and villages in North Yorkshire we cover. Our jobs stretch from Raw to Newcastle upon Tyne (58 miles away).
Our visits in YO22 work the same way as everywhere else we cover. Jobs here include addresses on Church Lane and Shop Hill. Other places close to Raw include Fylingthorpe (1 mile south), Robin Hood's Bay (1 mile east), Hawsker (1 mile north-west), Stainsacre (2 miles north-west) and Sneaton (3 miles north-west). We also work in nearby towns such as Scarborough (12 miles south-east), Whitby (4 miles north-west), Falsgrave (12 miles south-east), Northstead (12 miles south-east), Newby (11 miles south-east) and Scalby (10 miles south-east).
What’s near Raw
We visit homes around Victoria Hotel and Old St Stephen's Church, among other places. For rail, the closest station is Ruswarp station, roughly 3.8 miles north-west of the centre. Further afield, we also cover the area around Whitby Castle (4.3 miles north-west) and Robin Hoods Bay & Fylingdales Museum (less than half a mile south-east).
Worktop repair in Raw without replacing anything
A worktop repair is carried out in your kitchen. Most repairs take a few hours, and the worktop can be used again soon after. Our repair technicians work on quartz, laminate and solid wood, and people most often call us about dents and gouges and chips on edges and corners.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Raw (YO22)
- Region
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. A few tips:
- Don’t knock pans against the edge
- Wipe up spills quickly
- Never put hot pans down directly
- Use a chopping board
Wipe water away from joints and around the sink, particularly with laminate and timber.
Daily use can make burns and chips worse particularly around the sink. Repairing it sooner keeps the job smaller.
What worktop repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- The material
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- A wider photo showing the entire worktop
- Details of any past repairs
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the whole worktop, include your postcode and send them over. You will get a fixed quote, not an estimate.
Landlord and trade work in Raw
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What else we do in Raw
What we are called out for in Raw
Most worktop damage takes a second: a hot pan put down without a trivet, or a heavy pan knocked against the edge. Scratches build up more slowly, from knives and grit.
Most people get in touch when they notice something like this:
- Chips near the sink
- A heat mark or burn
- Chips in quartz or granite
- Gouges in the surface
Comparing quotes
- The length of the guarantee and what it covers
- Aftercare advice
- What protection goes down before work starts
- Whether there are any call-out or travel charges
Different materials, different repairs
Wood
Timber tops can be sanded and refinished, and burns and dents repaired.
Solid surface
Solid surface materials are uniform throughout, so scratches and burns can frequently be sanded out and refinished.
Your questions about worktop repair in Raw
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do I need to empty the worktop?
Only the area we’re working on. The rest is covered and protected.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across North Yorkshire.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How do I get a price for worktop repair in Raw?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What happens on the day
We begin by going over the job with you. After that, protection goes down around the work area and we start. Allow a few hours, and we will keep you posted as we go.
- First we look at the damage and what the worktop is made of.
- The area is cleaned and the edges of the damage prepared.
- We fill the damage with a suitable filler and build up any lost edge.
- We recreate the colour and pattern by hand.
- We seal or finish the surface to suit the worktop.
Before we arrive
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Ask for a price
For a price in Raw, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Cracks right through stone that has moved
- Laminate that has blown or swollen
- Severe heat marks in quartz
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Granite & marble
- Quartz
- Laminate
- Solid wood
- Solid surface (such as Corian)
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
