Orkney Islands · Scotland

Worktop Repair for Tenston homes

Worktop repair for Tenston, without a refit. Send us pictures for a fixed quote, then we come to you.

  • Repairs from £95
  • Chips in quartz or granite
  • Scratches and knife marks
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair near Tenston

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Cracks right through stone that has moved
  • Failed support under the worktop
  • Laminate swollen by water from underneath

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Solid surface (such as Corian)
  • Laminate
  • Granite & marble
  • Solid wood
  • Quartz

About our worktop repair in Tenston

The hard part of a worktop repair is matching the pattern. We build up the colour and flecks by hand so the repair blends in. If you are dealing with a heat mark or burn and damage around the sink cut-out, we can normally put it right.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Surface Doctor technician repairing a wooden kitchen worktop
Where
Tenston (KW16)
County
Orkney Islands
Warranty
12 months on all our work
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Should you replace it?

Replacing a worktop means removing the old one, templating and fitting a replacement and refitting the sink and hob, and it may not match the rest of the kitchen. Repairing the damage leaves the worktop in place. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Tenston

  • Straight answers about what a repair can do
  • One-year guarantee on every repair
  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited

See our prices page.

Your questions about worktop repair in Tenston

What do you need from me?

Just photos, your postcode and a contact number. On the day, access to the room.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Do you cover the whole of the Orkney Islands?

We work UK-wide. Our prices are the same everywhere.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Different materials, different repairs

Quartz

Quartz is crushed stone bound with resin. We fill and polish chipped edges to match the sheen.

Granite and stone

Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.

Covering Tenston

Tenston is about 12 miles west of Kirkwall, in the Orkney Islands. We travel to homes and businesses in Tenston and nearby villages, so there is no workshop to go to. Tenston is one of 51 places in the Orkney Islands where we work.

All of KW16 is within our area. Other places close to Tenston include Wasbister (1 mile south), Russland (2 miles north-east), Hourston (2 miles north-east), Skeabrae (3 miles north) and Harray (3 miles east). Remote and island addresses take a little more planning, so it’s best to call first.

Local landmarks in Tenston

Further afield, we also cover the area around Skara Brae Visitor Centre (2.8 miles north-west). For a walk, there’s Mill Dam of Rango and Hill of Miffia.

Map of Tenston © OpenStreetMap contributors

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How to look after the repair

Once the work has cured, treat it gently:

  • Clean spills right away
  • Oil wooden tops regularly
  • Use pH-neutral cleaners on stone
  • Use a chopping board

Never put hot pans straight onto the worktop. Heat can mark quartz and stone as well.

Damage near the sink is worth repairing quickly, as water can get in and cause swelling.

Prices and what affects them

Prices start from £95. A fixed quote means you know the cost before booking. We take into account:

  • What kind of damage it is
  • How much damage there is
  • Doing more than one item at once
  • The material and finish

The price reflects the work involved, not where you live. The full price is agreed before you book.

How to get a fixed price

Before you send pictures, a few simple things make all the difference:

  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the worktop, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

When to call us in Tenston

Cut-outs for the sink and hob are the weakest parts, so cracks and chips often start there.

Send us a photo if you notice any of these:

  • Scratches and knife marks
  • A chipped edge
  • Damage around the sink cut-out
  • Chips caused during installation

Before you book anyone

  • How the room is protected while they work
  • Who turns up on the day
  • How changes to the job are handled
  • How the colour is matched

Choosing a repair company

What we do, step by step

Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, and we finish by cleaning up and talking you through the result.

  1. The area around the damage is protected.
  2. The damage is cleaned and any loose material removed.
  3. We fill it and level it with the worktop.
  4. We recreate the colour and pattern by hand.
  5. The repair is sealed and polished to match.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Plan for the room to be out of bounds to pets and children

Ask for a price

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.