Kent · England
Worktop Repair for Way homes
Chip, burn and scratch repairs to kitchen and bathroom worktops for homeowners, landlords and businesses in Way. Send photos for a free, fixed quote.
- Repairs from £95
- Chipped corners
- Cuts and scratches in the surface
About our worktop repair in Way
A new worktop rarely matches the old one, particularly where several lengths join. A repair leaves the kitchen untouched. We work on solid surface (such as Corian), solid wood and laminate, and the jobs we see most are knife marks and chips on edges and corners.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Way (CT12)
- County
- Kent
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Way
Repairs from £95. We price every job individually. What matters most is:
- The type of damage
- Where the damage is and how we get to it
- The colour and finish to match
- How much damage there is
We charge the same wherever you are, with no extra for Way. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Send us pictures of the damage and a wider shot of the entire item, with your CT12 postcode, and we’ll reply with a fixed price.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Discolouration deep in quartz
- Failed support under the worktop
- A cracked stone top that’s unsupported
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Quartz
- Solid surface (such as Corian)
- Granite & marble
- Solid wood
- Laminate
Way and nearby
Way is about 3 miles west of Ramsgate, in Kent. Jobs in Way are booked in like any other job: a fixed quote from photos, then a visit to do the work. Way is one of 922 towns and villages in Kent where we work. We work right across the region, from Way to London (62 miles away).
Our visits in CT12 are booked in the same way as anywhere else. From Wayborough Hill and Way Hill or anywhere nearby, we can come to you. Close by, we cover Mount Pleasant (1 mile north-west), Sevenscore (1 mile south-east), Minster (1 mile west), Acol (1 mile north-west) and Cliffs End (2 miles south-east). Further out, we also cover Canterbury (12 miles west), Margate (4 miles north-east), Dover (14 miles south), Ramsgate (3 miles east), Broadstairs (5 miles east) and Whitstable (13 miles west).
Around Way
In Way, that means homes near Sandwich and Pegwell Bay, Church of Saint Mary the Virgin and Minster Church of England Primary School, among other places. Way’s nearest station is Minster station, about 0.9 miles south-west. Nearby you’ll also find Westwood Cross (3.1 miles north-east) and Ramsgate General Hospital (3.5 miles east). Open spaces near Way include Sandwich and Pegwell Bay.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- The area around the damage is protected.
- We clean the damage and remove anything loose.
- It’s filled and levelled with the surface.
- We recreate the colour and pattern by hand.
- We seal and polish it to the right sheen.
Getting ready for the visit
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole worktop, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Common questions in Way
What does worktop repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you repair a chipped quartz worktop?
Yes. Chips on edges and around the sink are very common repairs, filled and polished to match.
Will the repair match a patterned worktop?
Colour, flecks and veins are recreated by hand, so the repair blends into the surface.
How to look after the repair
Most damage we see is avoidable. A few tips:
- Keep wood oiled
- Steer clear of strong cleaners
- Use a chopping board
- Clean spills right away
Keep joints and the sink edge dry, especially on laminate and wood.
A burn or chip can get worse with daily use particularly around the sink. Repairing it sooner keeps the job smaller.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Way
Also in Way
What we’re called out for in Way
Edges and corners chip most frequently, generally from pans, tins or dishes knocked against them.
The most common problems we are called about are:
- Cuts and scratches in the surface
- Chips on edges and corners
- A heat mark or burn
- A damaged sink edge
Before you book anyone
- What protection goes down before work starts
- When it can be used again
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
Different materials, different repairs
Quartz
Quartz is hard, but its edges are brittle. We fill chips with a tinted resin and polish them to the worktop’s finish.
Wood
Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.
About our accreditations · Every repair comes with a one-year guarantee.
