Kent · England
Bath Re-enamelling for Way homes
Fixed-price bath re-enamelling in Way and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Way
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Whether it’s lots of chips and rust spots and enamel that’s lost its shine and feels rough, we can typically put it right, on pressed steel baths, cast iron baths and acrylic baths alike.
You get a one-year guarantee, the same in Way as everywhere else we work.
- Location
- Way (CT12)
- County
- Kent
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What bath re-enamelling costs
Prices start from £350. We price every job individually. The main factors are:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Way. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- One picture of the whole bath
- Details of any past repairs
- Your postcode, so we can check dates
- The material, if you know it
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Repair or replace in Way?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Same prices wherever you are
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
Read our full price list or guide to resurfacing and replacement costs.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
What happens on the day
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
How to get a price
If you are in Way and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
About Way
Way is about 3 miles west of Ramsgate, in Kent. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 922 places across Kent. We work right across the region, from Way to London (62 miles away).
Our visits in CT12 are booked in the same way as anywhere else. From Wayborough Hill and Way Hill or anywhere nearby, we can come to you. If you’re just outside Way, we cover Mount Pleasant (1 mile north-west), Sevenscore (1 mile south-east), Minster (1 mile west), Acol (1 mile north-west) and Cliffs End (2 miles south-east). Within a short drive, we also cover Canterbury (12 miles west), Margate (4 miles north-east), Dover (14 miles south), Ramsgate (3 miles east), Broadstairs (5 miles east) and Whitstable (13 miles west).
Landmarks near Way
Our customers here include homes close to Sandwich and Pegwell Bay, Church of Saint Mary the Virgin and Minster Church of England Primary School and the streets around them. For rail, the closest station is Minster station, roughly 0.9 miles south-west of the centre. Further afield, we also cover the area around Westwood Cross (3.1 miles north-east) and Ramsgate General Hospital (3.5 miles east). The countryside around Way includes Sandwich and Pegwell Bay.
Your questions about bath re-enamelling in Way
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do you cover the whole of Kent?
We cover the entire UK, including Way and the rest of Kent. Send your postcode with your photos and we will confirm dates.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
How to look after the repair
Simple care helps the repair last. We recommend:
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlord and trade work in Way
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Common problems we fix in Way
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Get in touch if you’ve noticed any of these:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- Stains that won’t shift
- Chips and rust in more than one place
Questions to ask before you book
- When it can be used again
- How the room is protected while they work
- Who turns up on the day
- How long the guarantee is and what it covers
Nearby places to Way
Other services in Way
About our accreditations · Every repair comes with a one-year guarantee.
