Dorset · England

Worktop repair in Wraxall, Dorset

Worktop repair across Wraxall and nearby, usually in one visit and guaranteed for a year.

  • Repairs from £95
  • Chips near the sink
  • Cuts and scratches in the surface
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Wraxall

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Don’t cut directly on the worktop
  • Don’t knock pans against the edge
  • Keep wood oiled
  • Do not let water sit on joints

Hot pans should always go on a trivet. Even stone and quartz can be marked by heat.

Edge chips can get bigger, and on laminate, water can get into the core. Repairing it early stops that.

Worktop repair in Wraxall without replacing anything

You do not need a new worktop because of one mark. The damage is filled and refinished so it blends into the pattern. If you’re dealing with damage from fitting or building work and scorch marks from pans, we can typically put it right, on solid surface (such as Corian), quartz and laminate alike.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.

Where
Wraxall (DT2)
Area hub
Dorset
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: damaged granite tiles repaired in place

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

How we price worktop repair

Repairs from £95. There’s no area surcharge for Wraxall. The price reflects:

  • Whether we combine several jobs
  • The material and finish
  • The colour and finish to match
  • The size and number of damaged areas

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what we need:

  • A picture taken from further back
  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know

Upload pictures of the damage and a wider shot of the whole item, with your DT2 postcode, and we will come back with a fixed quote.

Questions from Wraxall

Are there extra charges for Wraxall?

We don’t add a call-out fee. Your fixed price includes everything.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

How much do I need to move?

Only the area we are working on. We protect the rest of the kitchen.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

Do you cover the entire of Dorset?

All of Dorset, and the rest of the UK. Travel is included in the price.

What happens if you find more damage?

Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.

Can you match the pattern on my worktop?

Colour, flecks and veins are recreated by hand, so the repair blends into the surface.

Do you need worktop repair in Wraxall?

The worst damage frequently happens in a moment: a hot pan set straight down, or a heavy pan catching the edge. Scratches build up gradually from knives and grit.

These are the problems we’re asked about most:

  • A chipped edge
  • Burns from hot pans
  • A chipped quartz edge
  • Damage around the sink cut-out

Before booking anyone

  • Whether they match the colour on site
  • When it can be used again
  • Aftercare advice
  • Who turns up on the day

10 questions to ask before booking

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

What your worktop is made of matters

Laminate

Laminate worktops have a printed decorative layer over a board core. We fill the damage and recreate the pattern.

Solid surface

Solid surface tops are the same material all the way through, so scratches and burns can often be sanded out and refinished.

When we would advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • Water-swollen laminate
  • Through cracks in stone that is moving
  • Severe heat marks in quartz

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Quartz
  • Solid surface (such as Corian)
  • Laminate
  • Solid wood
  • Granite & marble

The process

We work cleanly and quietly. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. The area around the damage is protected.
  2. We clean the damage and remove anything loose.
  3. It’s filled and levelled with the surface.
  4. We recreate the colour and pattern by hand.
  5. We seal and polish it to the right sheen.

How to prepare

  • Mention any parking restrictions or tricky access
  • Have somewhere for us to park nearby if possible
  • Clear toiletries, mats and anything else from around the area

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.

Send pictures for a quote

Advice

Our work in Wraxall

Wraxall is about 8 miles north-east of Bridport, in Dorset. Wherever you are in the DT2 postcode area, we come to you. Wraxall is one of 462 places in Dorset we cover.

Jobs in DT2 work the same way as everywhere else we cover. We also cover the places around Wraxall: Rampisham (1 mile north-west), Evershot (2 miles north), Benville (3 miles north-west), Melbury Sampford (3 miles north) and West Chelborough (3 miles north-west). Within a short drive, we also cover Weymouth (15 miles south-east), Dorchester (9 miles south-east), Bridport (8 miles south-west), Sherborne (11 miles north), Rodwell (15 miles south-east) and Fordington (10 miles south-east).

Landmarks near Wraxall

Our clients here include homes close to Parish Church of St Mary. The nearest railway station is Maiden Newton station, roughly 2.2 miles south-east of the centre. Further afield, we also cover the area around Burcomb Wood (4.2 miles west). Open spaces near Wraxall include Nunnery Mead and Rampisham Down.

Map of Wraxall © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.