York · England

Bath Re-enamelling in Acaster Malbis

Bath re-enamelling across Acaster Malbis and nearby, generally in one visit.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Acaster Malbis?

About our bath re-enamelling in Acaster Malbis

Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. We work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are worn patches where water runs and sits and a dull, rough surface that won’t come clean.

Whatever the size of the job, you get the same one-year guarantee in Acaster Malbis and across York.

Surface Doctor technician refinishing the outside of a roll-top bath
Location
Acaster Malbis (YO23)
County
York
Guarantee
A year, on every repair
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Prices and what affects them

Prices start from £350. Every quote is fixed and free. What we look at:

  • Unusual colours or finishes
  • The material and finish
  • How much damage there is
  • Whether we combine several jobs

Our prices are the same across the UK, with no extra for Acaster Malbis. What changes the price is the job itself: the material, the amount of damage and how many items.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what we need:

  • A photo taken from further back
  • Any earlier repairs or coatings
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection

Email us a photo of the damage and one of the entire item, with your YO23 postcode, and we’ll reply with a fixed quote.

What happens on the day

The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through how soon it can be used and how to care for it.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s generally ready the day after.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Mention if the room is upstairs or in a flat
  • Clear toiletries, mats and anything else from around the area

Get a quote

If you’re in Acaster Malbis and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Get a fixed price

Read more

Signs you need bath re-enamelling in Acaster Malbis

Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.

It’s worth getting a quote if you see:

  • Wear marks under the taps
  • Lots of chips and rust spots
  • Stains that won’t shift
  • A dull, rough surface that won’t come clean

What your quote should include

  • Whether there are any call-out or travel charges
  • What aftercare is recommended
  • How long the guarantee is and what it covers
  • Whether cleaning and preparation are in the price

Our hiring checklist

Common questions in Acaster Malbis

Can pets and children be at home?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Are there extra charges for Acaster Malbis?

No. Our quotes include travel, with the same prices everywhere we work.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

What does bath re-enamelling cost?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What areas do you cover?

All of York, and the rest of the UK. Travel is included in the price.

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Clean with a soft cloth and mild detergent
  • Get any chip repaired quickly
  • Do not let dyes or oils sit on the finish
  • Avoid suction-cup mats

Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

Landlords, agents and businesses in Acaster Malbis

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

What your bath is made of matters

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

About Acaster Malbis

Acaster Malbis is about 5 miles south of York, in York. Across the YO23 area, we come to you. We cover all 79 towns and villages across York. You can also see our page for Leeds, about 19 miles away.

Postcode districts we cover here: YO23. Whether you live on Oak Avenue, Cundall Drive and The Close or a nearby road, we can come to you. If you’re just outside Acaster Malbis, we cover Acaster Selby (2 miles south), Appleton Roebuck (2 miles south-west), Bolton Percy (4 miles south-west), Ryther (4 miles south-west) and Ozendyke (4 miles south-west). We also work in nearby towns such as York (5 miles north), Clementhorpe (4 miles north), Bishophill (4 miles north), Hungate (5 miles north), Clifton (6 miles north) and Tang Hall (5 miles north-east).

Local landmarks in Acaster Malbis

We visit homes around Naburn Church of England Primary School, The Ship Inn and Holy Trinity Church. Acaster Malbis’s nearest station is York station, about 4.6 miles north of the centre. A little further out are Bishopthorpe Rural District (1.9 miles south-west) and York Designer Outlet (2.5 miles north-east). Open spaces near Acaster Malbis include Siward's Howe.

Map of Acaster Malbis © OpenStreetMap contributors

What we cannot put right

We will not take on work that will not last, so these are the limits:

  • A bath that is rusted through
  • Damage hidden under a previous coating, until it’s stripped back
  • A cast iron or steel bath that’s cracked right through

If in doubt, send photos and we will say what we think.

Surfaces we repair

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.