North Yorkshire · England
Bath Re-enamelling for Ozendyke homes
Problem with your bath in Ozendyke? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coating lifting around the plughole
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Bath re-enamelling in Ozendyke without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Common call-outs are for an original cast iron bath that needs restoring and brown or grey marks that don’t clean off, on acrylic baths, Victorian roll-tops and pressed steel baths.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Ozendyke (LS24)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
- Clear the area around the damage
How to get a price
Most customers in Ozendyke get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
When a repair is not the answer
We won’t take on work that won’t last, so these are the limits:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About Ozendyke
Ozendyke is about 7 miles north-west of Selby, in North Yorkshire. Wherever you are in the LS24 postcode area, we carry out the work at your property. Ozendyke is one of 626 places in North Yorkshire where we work. Our jobs stretch from Ozendyke to Leeds (about 15 miles away).
Postcode districts we cover here: LS24. Neighbouring places we cover include Ryther (1 mile east), Bolton Percy (1 mile north), Appleton Roebuck (2 miles north-east), Acaster Selby (3 miles east) and Cawood (3 miles south-east). Further out, we also cover Selby (7 miles south-east), Tadcaster (4 miles north-west), Barlby (7 miles south-east), Brayton (7 miles south-east), Thorpe Willoughby (6 miles south-east) and Hambleton (6 miles south).
Near you in Ozendyke
In Ozendyke, that means homes near Church of All Saints. Ozendyke’s nearest station is Ulleskelf station, about 1.1 miles west. Further afield, we also cover the area around Bishopthorpe Rural District (2.4 miles north-east) and The Ark Museum (3.9 miles north-west).
Repairing versus replacing in Ozendyke
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Honest advice, even when it means no job
- Same prices wherever you are
- We come to you, anywhere in the UK
- A year’s guarantee on all work
Read our full price list and resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Ozendyke?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Stains that won’t shift
- An outdated colour you’d like to change
- Chips and rust in more than one place
- A coating lifting around the plughole
Questions to ask before booking
- How long it needs to cure
- What happens if the damage is worse than the photos show
- What prep work is covered
- How the colour is matched
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- How much damage there is
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- The material, if you know it
- Your postcode, so we can check dates
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Also near Ozendyke
Also in Ozendyke
FAQs for Ozendyke
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
How long is the bath unusable?
One day for most baths, ready the next day. We’ll confirm timings when we quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
What happens if you find more damage?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
About our accreditations · Every repair comes with a one-year guarantee.
