Kent · England
Bath re-enamelling & resurfacing in Acton, Kent
Full bath re-enamelling and resurfacing at your home in Acton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
About our bath re-enamelling in Acton
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Our repair technicians work on pressed steel baths, acrylic baths and cast iron baths, and common reasons people contact us are stains that won’t shift and a roll-top that’s seen better days.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Acton (TN30)
- County
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
The process
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Read more
Keeping it looking good
How the surface is treated afterwards matters:
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Landlords, agents and businesses in Acton
We work for landlords, letting agents and housing providers in Acton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Do you need bath re-enamelling in Acton?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The most common problems we are called about are:
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- Chips and rust in more than one place
What to look for in a quote
- How the colour is matched
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- Whether a trained technician does the job
Towns and villages near Acton
What else we do in Acton
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Our work in Acton
Acton is about 10 miles south-west of Ashford, in Kent. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Acton is one of 922 towns and villages in Kent we cover. Our jobs stretch from Acton to London (about 48 miles away).
Jobs in TN30 are booked in the same way as anywhere else. If you’re just outside Acton, we cover The Stocks (1 mile south), Stone Corner (1 mile north-east), Wittersham (1 mile south-west), Reading Street (2 miles north-east) and Stone in Oxney (2 miles east). We also work in nearby towns such as Ashford (10 miles north-east), Tenterden (4 miles north), Kennington (12 miles north-east), New Romney (10 miles east), Staplehurst (12 miles north-west) and Stanhope (10 miles north-east).
Around Acton
In Acton, that means homes near Wittersham Church of England Primary School, The Ewe And Lamb Inn and Parish Church of St John the Baptist, among other places. Acton’s nearest station is Appledore (Kent) station, about 4.4 miles east. Nearby you will also find Smallhythe Place (1.5 miles north-west) and Ypres Tower (4.9 miles south). Not far away are Flatropers Wood.
Repair or replace in Acton?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing generally wins. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Acton. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Typically one visit, start to finish
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- A year’s guarantee on all work
Take a look at our full price list or resurfacing vs replacement cost guide.
Questions from Acton
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
About our accreditations · Every repair comes with a one-year guarantee.
