Kent · England
Bath Re-enamelling in Reading Street
Bath re-enamelling for Reading Street, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Repairing versus replacing in Reading Street
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, with the bath back in use the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Reading Street. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Reading Street
- Colour mixed on the day to match
- No need to remove anything
- Rooms protected and left tidy
- Free fixed quotes from pictures
See our prices page and bath cost comparison.
Bath re-enamelling at your home in Reading Street
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a peeling or bubbling previous coating and worn patches where water runs and sits, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Reading Street (TN30)
- Region
- Kent
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Reading Street
More services for Reading Street
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What a repair cannot fix
A repair is not right for every job, for example:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Reading Street
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What we’re called out for in Reading Street
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
Most people contact us after spotting one of these:
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Before you book anyone
- Whether a trained technician does the job
- What happens if they find more damage
- When it can be used again
- What prep work is covered
Keeping it looking good
Aftercare is simple:
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Keep a parking space free if you can
Getting a price
To get a price, send a couple of photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Advice
Reading Street and the surrounding area
Reading Street is about 9 miles south-west of Ashford, in Kent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 922 towns and villages across Kent. Our jobs stretch from Reading Street to London (48 miles away).
Our visits in TN30 are booked in the same way as anywhere else. We also cover the places around Reading Street: Stone Corner (1 mile south-west), Acton (2 miles south-west), Appledore Heath (2 miles east), Leigh Green (2 miles north-west) and Stone in Oxney (2 miles south-east). Further out, we also cover Ashford (9 miles north-east), Hythe (15 miles east), Tenterden (3 miles north-west), Kennington (11 miles north-east), New Romney (10 miles south-east) and Staplehurst (12 miles north-west).
Landmarks near Reading Street
Typical jobs here are in homes near Church of St Mary. The nearest railway station is Appledore (Kent) station, roughly 3.3 miles east. Nearby you will also find Smallhythe Place (1.8 miles west). Green spaces nearby include Orlestone Forest.
Landlords, agents and businesses in Reading Street
We work for landlords, letting agents and housing providers in Reading Street as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Common questions in Reading Street
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What areas do you cover?
The whole UK, including all of Kent. Just include your postcode and we’ll confirm dates.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
About our accreditations · Every repair comes with a one-year guarantee.
