Kent · England
Bath Re-enamelling in Stone Corner
Bath re-enamelling across Stone Corner and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- An old resurfacing that is failing
Bath re-enamelling in Stone Corner, done in place
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with an original cast iron bath that needs restoring and a peeling or bubbling previous coating, we can usually put it right.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Stone Corner (TN30)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Stone Corner
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens once I’ve sent pictures?
You will get a fixed quote back. You’re under no obligation.
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Stone Corner and the surrounding area
Stone Corner is about 10 miles south-west of Ashford, in Kent. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We cover all 922 towns and villages in Kent. Our jobs stretch from Stone Corner to London (about 48 miles away).
Our visits in TN30 work the same way as everywhere else we cover. Other places close to Stone Corner include Acton (1 mile south-west), The Stocks (1 mile south), Reading Street (1 mile north-east), Wittersham (1 mile south-west) and Stone in Oxney (2 miles east). Larger places within reach include Ashford (10 miles north-east), Tenterden (3 miles north-west), Kennington (12 miles north-east), New Romney (10 miles east), Staplehurst (12 miles north-west) and Stanhope (9 miles north-east).
Around Stone Corner
Stone Corner’s nearest station is Appledore (Kent) station, roughly 3.9 miles east. Further afield, we also cover the area around Smallhythe Place (1.4 miles north-west). Open spaces near Stone Corner include Flatropers Wood.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Colour-matched on site
- Every repair guaranteed for a year
- A fixed quote before you book
- We come to you, anywhere in the UK
Read our prices page and guide to resurfacing and replacement costs.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
When to call us in Stone Corner
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
It’s worth getting a quote if you see:
- A roll-top that’s seen better days
- Wear marks under the taps
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
What your quote should include
- What happens if they find more damage
- What preparation is included
- How to care for the finish
- Who turns up on the day
Nearby places to Stone Corner
What else we do in Stone Corner
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Open a window if you can
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Aftercare tips
Nothing complicated is needed:
- Never use suction bath mats
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
- Repair dripping taps early
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
