Cheshire East · England
Bath Re-enamelling in Adder's Moss
Bath re-enamelling across Adder's Moss and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Wear marks under the taps
How we handle bath re-enamelling in Adder's Moss
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and people most frequently call us about a bath that stays dull however much you clean it and an original cast iron bath that needs restoring.
You get a one-year guarantee, the same in Adder's Moss as everywhere else we work.
- Where
- Adder's Moss (SK10)
- County
- Cheshire East
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Adder's Moss
Adder's Moss is about 3 miles south-east of Wilmslow, in Cheshire East. Our repair technicians come to clients in Adder's Moss and nearby villages, so you do not need to take anything anywhere. Adder's Moss is one of 254 places in Cheshire East where we work. Our jobs stretch from Adder's Moss to Manchester (13 miles away).
Here we cover the SK10 postcode area. Streets in the area include Prestbury Road, School Lane and Macclesfield Road. If you’re just outside Adder's Moss, we cover Whirley Grove (2 miles south-east), Henbury (2 miles south), Prestbury (2 miles east), Broken Cross (2 miles south-east) and Butley Town (3 miles east). Further out, we also cover Macclesfield (3 miles south-east), Congleton (8 miles south), Wilmslow (3 miles north-west), Knutsford (7 miles west), Middlewich (12 miles south-west) and Sandbach (12 miles south-west).
Landmarks near Adder's Moss
In Adder's Moss, that means homes near The Fallibroome Academy, The Wizard pub and Mottram St Andrew Primary Academy, among other places. The nearest railway station is Alderley Edge station, roughly 2 miles north-west. Other landmarks nearby include Duke's Court (3.7 miles south-east) and Parkside Hospital (2.4 miles south-east). Green spaces nearby include Kerridge Hill and Lindow Common.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Repairing versus replacing in Adder's Moss
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Adder's Moss. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Adder's Moss clients choose us
- Rooms protected and left tidy
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
Take a look at our prices page or guide to resurfacing and replacement costs.
Towns and villages near Adder's Moss
Also in Adder's Moss
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a full day for most jobs. The room is left tidy and you will know when it can be used.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Make sure the area is dry
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- The colour and finish to match
- Access to the area
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- A photo taken from further back
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Questions from Adder's Moss
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
What happens next?
We review the pictures and send a fixed quote.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Can you quote from photos?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
About our accreditations · Every repair comes with a one-year guarantee.
